2000 Ford Excursion Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2000 Ford Excursion alarm wiring diagram. This will help you install your car alarm wiring correctly.
| Application | Wire Color and Location |
|---|---|
| Battery Constant Power 12v+ Wire (+) | Yellow |
| Battery Constant Power 12v+ Wire Location | At Ignition Switch Harness |
| Ignition Wire (+) | Red/Black |
| Ignition Wire Location | At Ignition Switch Harness |
| Second Ignition Wire (+) | Black/Light Green |
| Second Ignition Wire Location | At Ignition Switch Harness |
| Accessory Wire (+) | Gray/Yellow |
| Accessory Wire Location | At Ignition Switch Harness |
| Second Accessory Wire (+) | N/A |
| Second Accessory Wire Location | N/A |
| Starter Wire (+) | Red/Light Blue |
| Starter Wire Location | At Ignition Switch Harness |
| Second Starter Wire (+) | N/A |
| Second Starter Wire Location | N/A |
| Ground Wire | Chassis |
2000 Ford Excursion Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2000 Ford Excursion alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
| Application | Wire Color and Location |
|---|---|
| Brake Light Wire (+) | Light Green |
| Brake Light Wire Location | At Switch Above the Brake Pedal |
| Dome Light Supervision Wire | Use Door Trigger |
| Dome Light Supervision Wire Location | At Each Door |
| Door Trigger Wire (+) | Black/Light Blue |
| Door Trigger Wire Location | If the vehicle is equipped with a factory keyless entry, it is a type “B” door locking system and the wire is located in a gray molex plug to the right of the steering column. If the vehicle is equipped without a factory keyless entry, the vehicle is a type “C” door locking system and the wires are located in the drivers door harness. Use the drivers door switch when testing (this is the master switch). Vehicles with the key pad on the door are considered to have keyless entry. |
| Hood Pin Switch Wire (-) | N/A |
| Hood Pin Switch Wire Location | N/A |
| Horn Wire (-) | Dark Blue |
| Horn Wire Location | At the steering column wire harness. |
| Key Sense Wire (+) | N/A |
| Key Sense Wire Location | N/A |
| Parking Light Wire (+) | Brown |
| Parking Light Wire Location | At Headlight Switch |
| Power Door Lock Wire (-) | Pink/Yellow |
| Power Door Lock Wire Location | If the vehicle is equipped with a factory keyless entry, it is a type “B” door locking system and the wire is located in a gray molex plug to the right of the steering column. If the vehicle is equipped without a factory keyless entry, the vehicle is a type “C” door locking system and the wires are located in the drivers door harness. Use the drivers door switch when testing (this is the master switch). Vehicles with the key pad on the door are considered to have keyless entry. |
| Power Door Unlock Wire (-) | Pink/Light Green |
| Power Door Unlock Wire Location | If the vehicle is equipped with a factory keyless entry, it is a type “B” door locking system and the wire is located in a gray molex plug to the right of the steering column. If the vehicle is equipped without a factory keyless entry, the vehicle is a type “C” door locking system and the wires are located in the drivers door harness. Use the drivers door switch when testing (this is the master switch). Vehicles with the key pad on the door are considered to have keyless entry. |
| Tachometer Wire (-) | White/Pink |
| Tachometer Wire Location | The tachometer wire is located at the instrument cluster or in the main harness that runs on the inside of the firewall to the left of the steering column. |
| Trunk Pin Switch Wire (-) | N/A |
| Trunk Pin Switch Wire Location | N/A |
| Trunk Release Wire (-) | N/A |
| Trunk Release Wire Location | N/A |
| Wait to Start Light Wire (-) | Black/Pink |
| Wait to Start Light Wire Location | For diesel engines, the tachometer wire is a white/pink. The tachometer wire and wait to start wires are located at the PCM (Powertrain Control Module) or at the main harness that runs on the inside of the firewall to the left of the steering column. |
| Factory Alarm Arm Wire (-) | N/A |
| Factory Alarm Arm Wire Location | N/A |
| Factory Alarm Disarm Wire (-) | N/A |
| Factory Alarm Disarm Wire Location | N/A |
| Factory Anti-Theft System | Ford Transponder Anti-Theft System |
| Factory Anti-Theft System Location | Transponder at Ignition Switch Tumbler |
| Factory Immobilizer Bypass | Requires Immobilizer Bypass Module |
Feel free to use any 2000 Ford Excursion alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2000 Ford Excursion car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2000 Ford Excursion.