Updated: 06/26/2024 • Published: 04/24/2008
1990 Ford Taurus Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 1990 Ford Taurus alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | Red |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Starter Positive Wire (+) | Gray/Black |
Starter Positive Wire Location | Ignition Switch Harness |
Ignition Positive Wire (+) | Green/Yellow |
Ignition Positive Wire Location | Ignition Switch Harness |
Accessory Positive Wire (+) | Yellow |
Accessory Positive Wire Location | Ignition Switch Harness |
Key Sense Negative Wire (-) | Red/Black |
Key Sense Negative Wire Location | Ignition Switch Harness |
1990 Ford Taurus Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 1990 Ford Taurus alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Positive Wire (+) | Orange/Yellow |
Parking Light Positive Wire Location | At Headlight Switch or GEM (Tan Plug, Pin 14). The GEM (Generic Electronic Module) is located above the passenger kick panel. |
Power Door Lock Negative Wire (-) | Black/Red |
Power Door Lock Negative Wire Location | In Drivers Kick Panel or GEM (Gray Plug, Pin 15). The GEM (Generic Electronic Module) is located above the passenger kick panel. |
Power Door Unlock Negative Wire (-) | Tan/Yellow |
Power Door Unlock Negative Wire Location | In Drivers Kick Panel or Gray Plug at Pin 21. The GEM (Generic Electronic Module) is located above the passenger kick panel. |
Door Trigger Negative Wire (-) | This vehicle has (4) door trigger wires, the drivers door is a yellow/black (-) in a tan plug, pin 22, the passenger door is a black/blue (-) tan plug, pin 21, the drivers rear door is a black/orange (-) in a white plug, pin 15 and the passenger rear door is a black/green (-) in a gray plug, pin 15. When connecting to an alarm system use all 4 door trigger wires and diode isolate each trigger wire. |
Door Trigger Negative Wire Location | At Gem. The GEM (Generic Electronic Module) is located above the passenger kick panel. |
Dome Light Supervision Wire | Black/Blue (Requires Part #R30-H Relay) |
Dome Light Supervision Wire Location | At GEM (Grey Plug, Pin 3). The GEM (Generic Electronic Module) is located above the passenger kick panel. |
Trunk Release Negative Wire (-) | Black/Yellow (Requires Part #R30-H Relay) |
Trunk Release Negative Wire Location | At Trunk Release Switch |
Horn Negative Negative Wire (-) | Black/Blue or Black/Green |
Horn Negative Negative Wire Location | At Steering Column Harness Or GEM (Brown Plug, Pin 14) |
Tachometer Wire Negative Wire (-) | Black/Green or Black/Orange |
Tachometer Wire Negative Wire Location | At Ignition Coil |
Brake Light Positive Wire (+) | Green/Red |
Brake Light Positive Wire Location | At GEM (Tan Plug, Pin 9). The GEM (Generic Electronic Module) is located above the passenger kick panel. |
Factory Alarm Disarm Wire (-) | Black/White |
Factory Alarm Disarm Wire Location | At GEM (Gray Plug, Pin 14). The GEM (Generic Electronic Module) is located above the passenger kick panel. |
Anti Theft Type | Ford’s Securilock Anti-Theft Transponder System |
Feel free to use any 1990 Ford Taurus alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 1990 Ford Taurus car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 1990 Ford Taurus.