2013 Hyundai Santa Fe Car Alarm Wiring Info

2013 Hyundai Santa Fe Car Alarm Wiring Info

Battery Constant 12v+ Positive Wire (+): Red
Battery Constant 12v+ Positive Wire Location: At Ignition Switch (Black 6-Pin Plug)

Starter Positive Wire (+): Black
Starter Positive Wire Location: At Ignition Switch (Black 6-Pin Plug)

Second Starter Positive Wire (+): N/A
Second Starter Positive Wire Location: N/A

Ignition Positive Wire (+): Green
Ignition Positive Wire Location: At Ignition Switch (Black 6-Pin Plug)

Second Ignition Positive Wire (+): N/A
Second Ignition Positive Wire Location: N/A

Third Ignition Positive Wire (+): N/A
Third Ignition Positive Wire Location: N/A

Accessory Positive Wire (+): Blue
Accessory Positive Wire Location: At Ignition Switch (Black 6-Pin Plug)

Second Accessory Positive Wire (+): Pink
Second Accessory Positive Wire Location: At Ignition Switch (Black 6-Pin Plug)

Key Sense Wire: N/A
Key Sense Wire Location: N/A

Parking Light Negative Wire (-): Pink
Parking Light Negative Wire Location: At Headlight Switch (White 16-Pin Plug)

Parking Light Positive Wire (+): N/A
Parking Light Positive Wire Location: N/A

Power Door Lock Negative Wire (-): Connection Must Be Made by Interface Bypass Module
Power Door Lock Negative Wire Location: N/A

Power Door Unlock Negative Wire (-): Connection Must Be Made by Interface Bypass Module
Power Door Unlock Location: N/A

Door Trigger Negative Wire (-): N/A
Door Trigger Negative Wire Location: N/A

Dome Light Supervision Wire (-): Brown
Dome Light Supervision Wire Location: At Driver A Pillar (White 34-Pin Plug)

Trunk Release Negative Wire (-): Connection Must Be Made by Interface Bypass Module
Trunk Release Negative Wire Location: N/A

Sliding Power Door Wire: N/A
Sliding Power Door Wire Location: N/A

Horn Negative Wire (-): Gray
Horn Negative Wire Location: At Driver Kick Panel (Black 46-Pin Plug)

Tachometer Wire Negative Wire (-): Connection Must Be Made by Interface Bypass Module
Tachometer Wire Negative Wire Location: N/A

Wait To Start Wire: N/A
Wait To Start Location: N/A

Brake Light Positive Wire (+): Connection Must Be Made by Interface Bypass Module
Brake Light Positive Wire Location: N/A

Factory Alarm Disarm Wire (-): Disarms with Connection to Interface Bypass Module
Factory Alarm Disarm Wire Location: N/A

Factory Anti-Theft System: Hyundai Transponder Anti-Theft System
Factory Anti-Theft System Location: Requires Interface Bypass Module

The 2013 Hyundai Santa Fe alarm wire color and location information above is updated as it is submitted by the Modified Life community.

Leave a Comment

Your email address will not be published.

1 × five =