2010 Kia Rio Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2010 Kia Rio alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant Power 12v+ Wire (+) | Green |
Battery Constant Power 12v+ Wire Location | At Ignition Switch Harness |
Ignition Wire (+) | Pink |
Ignition Wire Location | At Ignition Switch Harness |
Second Ignition Wire (+) | N/A |
Second Ignition Wire Location | N/A |
Accessory Wire (+) | Orange |
Accessory Wire Location | At Ignition Switch Harness |
Second Accessory Wire (+) | Yellow |
Second Accessory Wire Location | At Ignition Switch Harness |
Starter Wire (+) | White |
Starter Wire Location | At Ignition Switch Harness |
Ground Wire | Chassis |
2010 Kia Rio Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2010 Kia Rio alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Brake Light Wire (+) | Red/Orange |
Brake Light Wire Location | At Dash Fuse Box (Gray 18-Pin Plug, Pin 2). |
Dome Light Supervision Wire | Use Door Trigger |
Dome Light Supervision Wire Location | N/A |
Door Trigger Wire (-) | Green |
Door Trigger Wire Location | In Driver Kick Panel (Green 42-Pin Plug, Pin 2). |
Hood Pin Switch Wire (-) | N/A |
Hood Pin Switch Wire Location | N/A |
Horn Wire (-) | Blue |
Horn Wire Location | Left of the Dash Fuse Box (Blue 42-Pin Plug, Pin 35). |
Key Sense Wire (+) | N/A |
Key Sense Wire Location | N/A |
Parking Light Wire (-) | Green/Black (Left) and Yellow/Black (Right) |
Parking Light Wire Location | At Dash Fuse Box (Gray 18-Pin Plug, Pin 8 and 9). |
Power Door Lock Wire (-) | Blue |
Power Door Lock Wire Location | At Dash Fuse Box (White 16-Pin Plug, Pin 6). |
Power Door Unlock Wire (-) | Yellow/Black |
Power Door Unlock Wire Location | At Dash Fuse Box (White 16-Pin Plug, Pin 16). |
Tachometer Wire (-) | Green |
Tachometer Wire Location | Left of the Dash Fuse Box (Blue 42-Pin Plug, Pin 32). |
Trunk Pin Switch Wire (-) | N/A |
Trunk Pin Switch Wire Location | N/A |
Trunk Release Wire (+) | N/A |
Trunk Release Wire Location | N/A |
Factory Alarm Arm Wire (-) | N/A |
Factory Alarm Arm Wire Location | N/A |
Factory Alarm Disarm Wire (-) | White/Black (Test wire while turning the key in the driver door.) |
Factory Alarm Disarm Wire Location | In Driver Kick Panel (Green 42-Pin Plug, Pin 33). |
Factory Anti-Theft System | Kia Transponder Anti-Theft System |
Factory Anti-Theft System Location | At Ignition Switch Tumbler |
Factory Immobilizer Bypass | Requires Immobilizer Bypass Module |
Feel free to use any 2010 Kia Rio alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2010 Kia Rio car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2010 Kia Rio.