2008 Dodge Ram 1500 Car Security Wiring Instructions

  1. All Car Makes
  2. »
  3. Dodge Alarm Wiring Diagrams
  4. »
  5. 2008 Dodge Ram 1500 Car Security Wiring Instructions


Whether your an expert Dodge Ram 1500 car alarm installer, Dodge Ram 1500 performance fan or a novice Dodge Ram 1500 enthusiast with a 2008 Dodge Ram 1500, a Dodge Ram 1500 car alarm wiring diagram can save yourself a lot of time. One of the most time consuming tasks with installing an after market car alarm, car security, car remote start, automatic remote starter, shock sensor, tilt sensor, car alarm sensor or any auto alarm is identifying the correct color car security wires for a 2008 Dodge Ram 1500 headlight bulb size you need for your low beam or high beam and save time. Also, find your other car light bulb sizes including your fog light, reverse light, turn signal, brake light and more. It’s that easy!

The Modified Life staff has taken all its Dodge Ram 1500 car alarm wiring diagrams, Dodge Ram 1500 car security wiring diagrams, Dodge Ram 1500 car alarm wire diagrams, Dodge Ram 1500 car security wiring schematics, Dodge Ram 1500 car security diagrams, Dodge Ram 1500 remote starter wiring diagrams and cataloged them online for our visitors to use for free. Our automotive wiring diagrams allow you to enjoy your new auto security electronics rather than spend countless hours trying to figure out which wires goes where.

Feel free to use any Dodge Ram 1500 auto alarm wiring diagram that is listed on Modified Life but keep in mind that all information here is provided as-is without any warranty of any kind and most of the auto security wiring diagrams listed on our enthusiast website are submitted by the Modified Life community. Use of the wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 2008 Dodge Ram 1500.

Questions

If you have any questions pertaining to the car wiring in a 2008 Dodge Ram 1500, please feel free to post it at the bottom of this page and either we will do our best to find you the information you need or hopefully someone in the Modified Life community will have the information you are looking for.

Request a Car Alarm Wiring Diagram

If you can not find your car alarm wiring, car security wire diagram or auto alarm wire diagram on Modified Life, please feel free to post a car alarm wiring diagram request on this page and we will do our best to find you the diagram, schematic or information you need for your mobile security installation.

Adding More Information

If you would like to help the Modified Life community by adding a car security wire schematic, car alarm wire diagram, car remote starter wire diagram, auto remote starter wire diagram or auto security wire diagram to our resource, please feel free to post any additional car wiring information about the 2008 Dodge Ram 1500 on this page.

2008 Dodge Ram 1500 Car Security Wiring Instructions

Battery Constant 12v+ Positive Wire (+): Red
Battery Constant 12v+ Positive Wire Location: At Battery

Ignition Positive Wire (+): Pink/White
Ignition Positive Wire Location: Ignition Switch Harness

Second Ignition Positive Wire (+): N/A
Second Ignition Positive Wire Location: N/A

Third Ignition Positive Wire (+): N/A
Third Ignition Positive Wire Location: N/A

Accessory Positive Wire (+): Dark Blue/Pink
Accessory Positive Wire Location: At TIPM Module Under the Hood

Second Accessory Positive Wire (+): N/A
Second Accessory Positive Wire Location: N/A

Starter Positive Wire (+): Yellow/Gray (Do not use for remote start.)
Starter Positive Wire Location: At TIPM Module Under the Hood

Second Starter Positive Wire (+): N/A
Second Starter Positive Wire Location: N/A

Key Sense Wire: N/A
Key Sense Wire Location: N/A

Parking Light Negative Wire (-): N/A
Parking Light Negative Wire Location: N/A

Parking Lights Positive Wire (+): White/Light Green and White/Violet
Parking Lights Positive Wire Location: At PCM Module Under the Hood on Passenger Side

Power Door Lock Negative Wire (-): Violet/Light Green (300 ohm for lock. 100 ohm for unlock.)
Power Door Lock Negative Wire Location: At Module in Passenger Door

Power Door Unlock Negative Wire (-): Violet/Light Green (Same wire for lock, must use resistor for both, lock is through 820 ohm and unlock is straight ground. If the door locks go into a “sleep mode” you will need to pulse the key sense wire with the unlock wire as well to wake up the door circuit.)
Power Door Unlock Negative Wire Location: At Module in Passenger Door

Door Trigger Negative Wire (-): Use Individual Door Triggers And Diode Isolate Each Wire
Door Trigger Negative Wire Location: At Each Door Trigger

Dome Light Supervision Wire (-): Yellow/White
Dome Light Supervision Wire Location: In Harness at Instrument Cluster

Hood Trigger Negative Wire (-): Violet/Light Blue
Hood Trigger Negative Wire Location: At Hood Pin Switch

Trunk Trigger Negative Wire (-): N/A
Trunk Trigger Negative Wire Location: N/A

Sliding Power Door Wire: N/A
Sliding Power Door Wire Location: N/A

Horn Negative Wire (-): Dark Green/Violet
Horn Negative Wire Location: In Harness at Steering Column

Brake Light Positive Wire (+): White
Brake Light Positive Wire Location: At Switch Above the Brake Pedal

Factory Alarm Disarm Wire (-): N/A
Factory Alarm Disarm Wire Location: N/A

Factory Anti-Theft System: Daimler Sentry Key Vehicle Immobilizer
Factory Anti-Theft System Type: Key Sends a RF Signal to the BCM Module

The 2008 Dodge Ram 1500 alarm wire color and location information above is updated as it is submitted by the Modified Life community.

Leave a Comment

Your email address will not be published. Required fields are marked *

5 × 2 =