Updated: 06/26/2024 • Published: 05/01/2008
2007 Toyota Matrix Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2007 Toyota Matrix alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | White |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Starter Positive Wire (+) | Red |
Starter Positive Wire Location | Ignition Switch Harness |
Ignition Positive Wire (+) | Black/White |
Ignition Positive Wire Location | Ignition Switch Harness |
Second Ignition Positive Wire (+) | Tan/Yellow |
Second Ignition Positive Wire Location | Ignition Switch Harness |
Accessory Positive Wire (+) | Blue/Red |
Accessory Positive Wire Location | Ignition Switch Harness |
Key Sense Negative Wire (-) | Blue/Black |
Key Sense Negative Wire Location | Ignition Switch Harness |
2007 Toyota Matrix Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2007 Toyota Matrix alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Negative Wire (-) | Green/White |
Parking Light Negative Wire Location | At Head Light Switch |
Parking Light Positive Wire (+) | Green |
Parking Light Positive Wire Location | In Drivers Kick Panel, Harness To Rear Of Vehicle |
Power Door Lock Negative Wire (-) | Green (You must test the lock and unlock wires, while turning the key in the drivers door key cylinder.) |
Power Door Lock Negative Wire Location | In Drivers Kick Panel (Blue, 12-Pin Plug) |
Power Door Unlock Negative Wire (-) | Blue/Yellow (Requires a Double Pulse) |
Power Door Unlock Negative Wire Location | In Drivers Kick Panel (Blue, 12-Pin Plug) |
Door Trigger Negative Wire (-) | Red/White |
Door Trigger Negative Wire Location | At Interior Light Switch, On Dash |
Dome Light Supervision Wire | Red/Black (Requires Relay) |
Dome Light Supervision Wire Location | At Interior Light Switch, On Dash |
Trunk Release Negative Wire (-) | Blue/White (Requires Relay) |
Trunk Release Negative Wire Location | At Hatch Release Switch |
Horn Negative Negative Wire (-) | Green/Yellow |
Horn Negative Negative Wire Location | At Steering Column Harness |
Tachometer Wire Negative Wire (-) | Black |
Tachometer Wire Negative Wire Location | At ECM. The ECM (engine control module) is located behind the glove box. |
Brake Light Positive Wire (+) | Green/White (+) |
Brake Light Positive Wire Location | At Switch Above Brake Pedal |
Factory Alarm Disarm Wire (-) | Disarms With Keysense Wire (The keysense wire will disarm the vehicle without unlocking the doors by applying a negative to this wire during remote starting.) |
Factory Alarm Disarm Wire Location | At Ignition Switch Harness |
Anti Theft Type | Transponder anti-theft system, requires bypass module. The transponder anti-theft system is only on the 2007 model vehicles. |
Feel free to use any 2007 Toyota Matrix alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2007 Toyota Matrix car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2007 Toyota Matrix.