MODIFIEDLIFE

2007 Toyota FJ Cruiser Car Alarm Wiring Chart

2007 Toyota FJ Cruiser Alarm Wires

Find the right alarm wire colors, locations, and polarity with this 2007 Toyota FJ Cruiser alarm wiring diagram. This will help you install your car alarm wiring correctly.

Application Wire Color and Location
Battery Constant Power 12v+ Wire (+) Blue/Black
Battery Constant Power 12v+ Wire Location At Ignition Switch Harness
Ignition Wire (+) Black/Red
Ignition Wire Location At Ignition Switch Harness
Second Ignition Wire (+) Black/Yellow
Second Ignition Wire Location At Ignition Switch Harness
Accessory Wire (+) White/Green
Accessory Wire Location At Ignition Switch Harness
Second Accessory Wire (+) N/A
Second Accessory Wire Location N/A
Starter Wire (+) Green/Black
Starter Wire Location At Ignition Switch Harness
Second Starter Wire (+) Black/White
Second Starter Wire Location At Ignition Switch Harness
Ground Wire Chassis

2007 Toyota FJ Cruiser Alarm Sensor Wires

Find the right alarm sensor wire colors, locations, and polarity with this 2007 Toyota FJ Cruiser alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.

Application Wire Color and Location
Brake Light Wire (+) Green/Yellow
Brake Light Wire Location At Switch Above the Brake Pedal
Dome Light Supervision Wire White
Dome Light Supervision Wire Location At the dash fuse box.
Door Trigger Wire (+) Purple/Yellow
Door Trigger Wire Location At the Body ECU attached to the back of the dash fuse box.
Hood Pin Switch Wire (-) N/A
Hood Pin Switch Wire Location N/A
Horn Wire (-) Green/Red
Horn Wire Location At the horn switch.
Key Sense Wire (+) N/A
Key Sense Wire Location N/A
Parking Light Wire (-) Green/Black
Parking Light Wire Location At Headlight Switch
Power Door Lock Wire (-) Green/Black
Power Door Lock Wire Location Inside the driver side kick panel. This wire is only needed if the door locks do not function with the aftermarket system while the vehicle is running. All other times just use the factory alarm arm wire.
Power Door Unlock Wire (-) Green/White to Blue/Orange (Requires a Double Pulse)
Power Door Unlock Wire Location Inside the driver side kick panel. This wire is only needed if the door locks do not function with the aftermarket system while the vehicle is running. All other times just use the factory alarm disarm wire.
Tachometer Wire (-) Black/White
Tachometer Wire Location At the data link connector.
Trunk Pin Switch Wire (-) N/A
Trunk Pin Switch Wire Location N/A
Trunk Release Wire (+) Blue/Yellow (Requires Relay)
Trunk Release Wire Location At the motor in the rear door.
Wait to Start Light Wire (-) N/A
Wait to Start Light Wire Location N/A
Factory Alarm Arm Wire (-) N/A
Factory Alarm Arm Wire Location N/A
Factory Alarm Disarm Wire (-) Pink (Requires a Double Pulse)
Factory Alarm Disarm Wire Location Inside the driver side kick panel.
Factory Anti-Theft System Toyota Transponder Anti-Theft System
Factory Anti-Theft System Location Transponder at Ignition Switch Tumbler
Factory Immobilizer Bypass Requires Immobilizer Bypass Module

Feel free to use any 2007 Toyota FJ Cruiser alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2007 Toyota FJ Cruiser car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2007 Toyota FJ Cruiser.

Modified Life is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn how it works.

Leave a Comment

Your email address will not be published. Required fields are marked *