2007 Nissan Armada Car Alarm Wiring Diagram


Whether your an expert Nissan Armada car alarm installer, Nissan Armada performance fan or a novice Nissan Armada enthusiast with a 2007 Nissan Armada, a Nissan Armada car alarm wiring diagram can save yourself a lot of time. One of the most time consuming tasks with installing an after market car alarm, car security, car remote start, automatic remote starter, shock sensor, tilt sensor, car alarm sensor or any auto alarm is identifying the correct color car security wires for a 2007 Nissan Armada headlight bulb size you need for your low beam or high beam and save time. Also, find your other car light bulb sizes including your fog light, reverse light, turn signal, brake light and more. It’s that easy!

The Modified Life staff has taken all its Nissan Armada car alarm wiring diagrams, Nissan Armada car security wiring diagrams, Nissan Armada car alarm wire diagrams, Nissan Armada car security wiring schematics, Nissan Armada car security diagrams, Nissan Armada remote starter wiring diagrams and cataloged them online for our visitors to use for free. Our automotive wiring diagrams allow you to enjoy your new auto security electronics rather than spend countless hours trying to figure out which wires goes where.

Feel free to use any Nissan Armada auto alarm wiring diagram that is listed on Modified Life but keep in mind that all information here is provided “as is” without any warranty of any kind and most of the auto security wiring diagrams listed on our enthusiast website are submitted by the Modified Life community. Use of the wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 2007 Nissan Armada.

Questions

If you have any questions pertaining to the car wiring in a 2007 Nissan Armada, please feel free to post it at the bottom of this page and either we’ll do our best to find you the information you need or hopefully someone in the Modified Life community will have the information you are looking for.

Request a Car Alarm Wiring Diagram

If you can’t find your car alarm wiring, car security wire diagram or auto alarm wire diagram on Modified Life, please feel free to post a car alarm wiring diagram request on this page and we’ll do our best to find you the diagram, schematic or information you need for your mobile security installation.

Adding More Information

If you would like to help the Modified Life community by adding a car security wire schematic, car alarm wire diagram, car remote starter wire diagram, auto remote starter wire diagram or auto security wire diagram to our resource, please feel free to post any additional car wiring information about the 2007 Nissan Armada on this page.

2007 Nissan Armada Car Alarm Wiring Diagram

Battery Constant 12v+ Positive Wire (+): Green
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness

Starter Positive Wire (+): Brown (When installing a remote starter, you must use both starter #1 and starter #2 wires. Both wires must be connected to the starter/cranking output wire from the remote starter or the vehicle will not remote start when the engine is cold.)
Starter Positive Wire Location: Ignition Switch Harness

Secondary Starter Positive Wire (+): Light Green or Blue/Green (When installing a remote starter, you must use both starter #1 and starter #2 wires. Both wires must be connected to the starter/cranking output wire from the remote starter or the vehicle will not remote start when the engine is cold.)
Secondary Starter Positive Wire Location: Ignition Switch Harness

Ignition Positive Wire (+): Black/Red
Ignition Positive Wire Location: Ignition Switch Harness

Accessory Positive Wire (+): Red
Accessory Positive Wire Location: Ignition Switch Harness

Secondary Accessory Positive Wire (+): Purple
Secondary Accessory Positive Wire Location: Ignition Switch Harness

Parking Light Positive Wire (+): Red/Blue
Parking Light Positive Wire Location: In Either Kick Panel, Harness To Rear Of Vehicle

Power Door Lock Negative Wire (-): Blue
Power Door Lock Negative Wire Location: At Drivers Door Module, In Door, Pin 4

Power Door Unlock Negative Wire (-): Red (Requires Double Pulse)
Power Door Unlock Negative Wire Location: At Drivers Door Module, In Door, Pin 6

Door Trigger Positive Wire (+): This vehicle has 4 door pin trigger wires, the drivers door is a light blue (-) pin 47, the passenger door is a red/blue (-) pin 12, the drivers rear door is a red/yellow (-) pin 48 and the passenger rear door is a red/white or gray (-) pin 13. All wires are at the BCM. When connecting to an alarm system, use all 4 door trigger wires and diode isolate.
Door Trigger Positive Wire Location: At BCM. The BCM (body control module) is located to the right of the steering column.

Domelight Supervision Wire: Blue (-)
Domelight Supervision Wire Location: At BCM (Pin 63). The BCM (body control module) is located to the right of the steering column.

Horn Negative Negative Wire (-): Red/White
Horn Negative Negative Wire Location: At Horn Switch In Steering Column

Tachometer Wire Negative Wire (-): Any Wire Not White/Blue Or Black
Tachometer Wire Negative Wire Location: At Any Ignition Coil

Brake Light Positive Wire (+): Red/Green
Brake Light Positive Wire Location: At Switch Above Brake Pedal

Factory Alarm Disarm Wire (-): Disarms With Unlock
Factory Alarm Disarm Wire Location: N/A

Factory Anti-Theft Wire (-): Nissan’s Transponder Anti-Theft System. Requires Bypass Module And Extra Ignition Key.
Factory Anti-Theft Wire Location: At Ignition Switch Tumbler

5 Responses

  1. Penh, some wires require you to splice them in and some require you to cut them. If you are not familiar with installing a remote start system, we suggest you find an authorized alarm and remote start installer. Good luck.

  2. do they need to cut the wire or they just connect to it?
    can you please give me some instructions

Leave a Reply

Your email address will not be published. Required fields are marked *

nineteen − seven =