MODIFIEDLIFE

2006 Toyota Corolla Car Alarm Wire Chart

2006 Toyota Corolla Alarm Wires

Find the right alarm wire colors, locations, and polarity with this 2006 Toyota Corolla alarm wiring diagram. This will help you install your car alarm wiring correctly.

Application Wire Color and Location
Battery Constant Power 12v+ Wire (+) White
Battery Constant Power 12v+ Wire Location At Ignition Switch Harness
Ignition Wire (+) Black/White
Ignition Wire Location At Ignition Switch Harness
Second Ignition Wire (+) Black/Yellow
Second Ignition Wire Location At the Ignition Switch Harness. There are (2) blue/red wires (+) in the ignition harness. The correct ignition wire is the heavier gauge wire and it has one silver hash mark. The wrong wire has (2) silver hash marks.
Accessory Wire (+) Blue/Red
Accessory Wire Location At Ignition Switch Harness
Second Accessory Wire (+) N/A
Second Accessory Wire Location N/A
Starter Wire (+) Red
Starter Wire Location At Ignition Switch Harness
Second Starter Wire (+) N/A
Second Starter Wire Location At Ignition Switch Harness
Ground Wire Chassis

2006 Toyota Corolla Alarm Sensor Wires

Find the right alarm sensor wire colors, locations, and polarity with this 2006 Toyota Corolla alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.

Application Wire Color and Location
Brake Light Wire (+) Green/White
Brake Light Wire Location At Switch Above Brake Pedal
Dome Light Supervision Wire Red/White (Requires Relay)
Dome Light Supervision Wire Location In Driver Kick Panel
Door Trigger Wire (+) Red/White
Door Trigger Wire Location At the Interior Door Switch on the Dash. For the door pin trigger on a 2006 model, use the red wire (-) at front of the fuse box (10-pin plug).
Hood Pin Switch Wire (-) N/A
Hood Pin Switch Wire Location N/A
Horn Wire (-) Green/Yellow
Horn Wire Location At the steering column wire harness.
Key Sense Wire (+) Blue/Black
Key Sense Wire Location At Ignition Switch Harness
Parking Light Wire (-) Green/White
Parking Light Wire Location At Headlight Switch
Power Door Lock Wire (-) Blue/White
Power Door Lock Wire Location At White Plug in the driver kick panel.
Power Door Unlock Wire (-) Blue
Power Door Unlock Wire Location At White Plug in the driver kick panel.
Tachometer Wire (-) Black
Tachometer Wire Location At ECM module behind the glove box.
Trunk Pin Switch Wire (-) N/A
Trunk Pin Switch Wire Location N/A
Trunk Release Wire (+) N/A
Trunk Release Wire Location N/A
Wait to Start Light Wire (-) N/A
Wait to Start Light Wire Location N/A
Factory Alarm Arm Wire (-) N/A
Factory Alarm Arm Wire Location N/A
Factory Alarm Disarm Wire (-) Disarms with the Key Sense Wire.
Factory Alarm Disarm Wire Location At Ignition Switch Harness
Factory Anti-Theft System Toyota Transponder Anti-Theft System
Factory Anti-Theft System Location Transponder at Ignition Switch Tumbler
Factory Immobilizer Bypass Requires Immobilizer Bypass Module

Feel free to use any 2006 Toyota Corolla alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2006 Toyota Corolla car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2006 Toyota Corolla.

Modified Life is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn how it works.

4 thoughts on “2006 Toyota Corolla Car Alarm Wire Chart”

  1. SO I GOT MY AVITAL 3100LX alarm install in my 2006 toyota corolla. Here’s my problem. When I arm the car when the doors are open, I can see the door locks lock and the the alarm arms. I disarm and i can see the door locks unlock and the alarm disarms. Now! When I close to door. And arm the car, the alarms arms and the locks remain unlocked. If I open the door the alarm goes off. So the issue is why isn’t it locking the door when they are closed when i arm the system?

    1. Nathanael, it could be any number of issues causing your 2006 Toyota corolla alarm problem. Start by making sure your door trigger wire is connected properly. If it is connected properly, it may not be the correct wire and may be causing your alarm to arm/disarm backwards. Try connecting your alarm door trigger input wire to the door pin switch located in the door jam. This should fix your alarm problem. Hope this helps! Let us know! Good luck with your 2006 Toyota Corolla alarm install.

  2. Armando, it sounds like your alarm system is in valet mode. Valet mode disables the alarm system but keep the keyless entry functions. The alarm system may still be in working order but just needs valet mode to be turned off. It would be hard to say how to turn off valet mode because different alarm systems have different procedures to turn valet mode off. Our advice would be to take your car to an experienced car alarm installer. They would be able to identify your alarm and should be able to turn off valet mode in a matter of a couple minutes. Hope this helps. Good luck with your 2006 Toyota Corolla alarm troubleshooting.

  3. i have a question. I have a 2006 toyota corolla S factory alarm. and my question is y doesn’t my alarm go off. it only locks n unlocks my doors. but when i try and test if my alarm works it doesnt sounds at all, n the light at the dashboard blinks but i dont know what should i do. any help?

Leave a Comment

Your email address will not be published. Required fields are marked *