2006 Saturn Vue Auto Alarm Wiring Diagram


Whether your an expert Saturn Vue car alarm installer, Saturn Vue performance fan or a novice Saturn Vue enthusiast with a 2006 Saturn Vue, a Saturn Vue car alarm wiring diagram can save yourself a lot of time. One of the most time consuming tasks with installing an after market car alarm, car security, car remote start, automatic remote starter, shock sensor, tilt sensor, car alarm sensor or any auto alarm is identifying the correct color car security wires for a 2006 Saturn Vue headlight bulb size you need for your low beam or high beam and save time. Also, find your other car light bulb sizes including your fog light, reverse light, turn signal, brake light and more. It’s that easy!

The Modified Life staff has taken all its Saturn Vue car alarm wiring diagrams, Saturn Vue car security wiring diagrams, Saturn Vue car alarm wire diagrams, Saturn Vue car security wiring schematics, Saturn Vue car security diagrams, Saturn Vue remote starter wiring diagrams and cataloged them online for our visitors to use for free. Our automotive wiring diagrams allow you to enjoy your new auto security electronics rather than spend countless hours trying to figure out which wires goes where.

Feel free to use any Saturn Vue auto alarm wiring diagram that is listed on Modified Life but keep in mind that all information here is provided “as is” without any warranty of any kind and most of the auto security wiring diagrams listed on our enthusiast website are submitted by the Modified Life community. Use of the wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 2006 Saturn Vue.

Questions

If you have any questions pertaining to the car wiring in a 2006 Saturn Vue, please feel free to post it at the bottom of this page and either we’ll do our best to find you the information you need or hopefully someone in the Modified Life community will have the information you are looking for.

Request a Car Alarm Wiring Diagram

If you can’t find your car alarm wiring, car security wire diagram or auto alarm wire diagram on Modified Life, please feel free to post a car alarm wiring diagram request on this page and we’ll do our best to find you the diagram, schematic or information you need for your mobile security installation.

Adding More Information

If you would like to help the Modified Life community by adding a car security wire schematic, car alarm wire diagram, car remote starter wire diagram, auto remote starter wire diagram or auto security wire diagram to our resource, please feel free to post any additional car wiring information about the 2006 Saturn Vue on this page.

2006 Saturn Vue Auto Alarm Wiring Diagram

Battery Constant 12v+ Positive Wire (+): Orange
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness

Starter Positive Wire (+): Yellow
Starter Positive Wire Location: Ignition Switch Harness

Ignition Positive Wire (+): Pink
Ignition Positive Wire Location: Ignition Switch Harness

Accessory Positive Wire (+): Orange
Accessory Positive Wire Location: Ignition Switch Harness

Key Sense Wire (-): Light Green (The light green (-) key sense wire at the steering column must see a (-) negative during remote start to keep the service engine light from coming on. This wire is also found in pin A11, gray 24-pin plug at BCM.)
Key Sense Wire Location: Ignition Switch Harness

Parking Light Positive Wire (+): Brown
Parking Light Positive Wire Location: At BCM, Pin B10, Gray 24-Pin Plug. The BCM (body control module) is in the center of the dash behind the pocket.

Power Door Lock Positive Wire (+): Red/Black
Power Door Lock Positive Wire Location: At BCM, Pin A8, 16-Pin Gray Plug. The BCM (body control module) is in the center of the dash behind the pocket.

Power Door Unlock Positive Wire (+): Orange/Black
Power Door Unlock Positive Wire Location: At BCM, Pin A7, 16-Pin Gray Plug. The BCM (body control module) is in the center of the dash behind the pocket.

Door Trigger Positive Wire (+): The driver door trigger is gray/black (-) in pin B2. The passenger door trigger is black/white (-) in pin A12. When connecting to an alarm system use both door trigger wires and diode isolate.
Door Trigger Positive Wire Location: At BCM, Pink 24-Pin Plug. The BCM (body control module) is in the center of the dash behind the pocket.

Domelight Supervision Wire (-): White
Domelight Supervision Wire Location: At BCM, Pink 24-Pin Plug, Pin A1. The BCM (body control module) is in the center of the dash behind the pocket.

Horn Negative Negative Wire (-): Black
Horn Negative Negative Wire Location: At BCM, Pin B2, Pink 24-Pin Plug. The BCM (body control module) is in the center of the dash behind the pocket.

Tachometer Wire Negative Wire (-): Any Wire Not Pink Or Red
Tachometer Wire Negative Wire Location: At Ignition Coil

Brake Light Positive Wire (+): Light Blue
Brake Light Positive Wire Location: At Switch Above Brake Pedal

Factory Alarm Disarm Wire (-): Disarms With Factory Remote Only
Factory Alarm Disarm Wire Location: N/A

Factory Anti-Theft Wire: Yellow (+), Orange/Black (-) And Red/White (Not Used)
Factory Anti-Theft Wire Location: GM Passlock 2 System, These Wires Exit The Ignition Switch Tumbler Together And Are In The Main Ignition Switch Harness In The Column.

Leave a Reply

Your email address will not be published. Required fields are marked *

nine + ten =