2004 Toyota 4Runner Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2004 Toyota 4Runner alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant Power 12v+ Wire (+) | White/Blue and Red |
Battery Constant Power 12v+ Wire Location | At Ignition Switch Harness |
Ignition Wire (+) | Black/Red |
Ignition Wire Location | At Ignition Switch Harness |
Second Ignition Wire (+) | Blue/Yellow |
Second Ignition Wire Location | At Ignition Switch Harness |
Accessory Wire (+) | White/Green |
Accessory Wire Location | At Ignition Switch Harness |
Second Accessory Wire (+) | N/A |
Second Accessory Wire Location | N/A |
Starter Wire (+) | Green/Black |
Starter Wire Location | At Ignition Switch Harness |
Second Starter Wire (+) | N/A |
Second Starter Wire Location | N/A |
Ground Wire | Chassis |
2004 Toyota 4Runner Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2004 Toyota 4Runner alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Brake Light Wire (+) | Green/Yellow |
Brake Light Wire Location | At Switch Above the Brake Pedal |
Dome Light Supervision Wire | White (Requires Relay) |
Dome Light Supervision Wire Location | At the plug to the right of fuse box. |
Door Trigger Wire (+) | Purple/Yellow |
Door Trigger Wire Location | At BECU (Body Electronic Control Unit) attached to the driver side dash fuse box. |
Hood Pin Switch Wire (-) | N/A |
Hood Pin Switch Wire Location | N/A |
Horn Wire (-) | Green/Red |
Horn Wire Location | At the steering column wire harness. |
Key Sense Wire (+) | N/A |
Key Sense Wire Location | N/A |
Parking Light Wire (-) | Green |
Parking Light Wire Location | At BECU (Body Electronic Control Unit) attached to the driver side dash fuse box. |
Power Door Lock Wire (-) | Blue |
Power Door Lock Wire Location | In Driver Kick Panel |
Power Door Unlock Wire (-) | Green (Requires a Double Pulse.) |
Power Door Unlock Wire Location | In Driver Kick Panel |
Tachometer Wire (-) | Black/White |
Tachometer Wire Location | At ECM (Engine Control Module) located behind the glove box. |
Trunk Pin Switch Wire (-) | N/A |
Trunk Pin Switch Wire Location | N/A |
Trunk Release Wire (+) | N/A |
Trunk Release Wire Location | N/A |
Wait to Start Light Wire (-) | N/A |
Wait to Start Light Wire Location | N/A |
Factory Alarm Arm Wire (-) | N/A |
Factory Alarm Arm Wire Location | N/A |
Factory Alarm Disarm Wire (-) | Disarms with Unlock |
Factory Alarm Disarm Wire Location | N/A |
Factory Anti-Theft System | Toyota Transponder Anti-Theft System |
Factory Anti-Theft System Location | Transponder at Ignition Switch Tumbler |
Factory Immobilizer Bypass | Requires Immobilizer Bypass Module |
Feel free to use any 2004 Toyota 4Runner alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2004 Toyota 4Runner car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2004 Toyota 4Runner.
3 thoughts on “2004 Toyota 4Runner Car Security Wiring Diagram”
Frank, ask and you shall receive: 2002 Toyota 4Runner Remote Start Wiring Diagram
I would like to view the 2002 Toyota 4Runner Car Security Wire Guide. I am connecting a remote start with keyless entry. Thanks!
I have a question regarding the power door lock wiring. I’m trying to install an alarm in my 04 4runner and cannot find the correct wires for lock/unlock. I found the plug that was stated as the correct one, but even after cutting the blue or green wires the lock still functioned. Anyone have suggestions?