2004 Ford Ranger Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2004 Ford Ranger alarm wiring diagram. This will help you install your car alarm wiring correctly.
| Application | Wire Color and Location |
|---|---|
| Battery Constant Power 12v+ Wire (+) | Yellow |
| Battery Constant Power 12v+ Wire Location | At Ignition Switch Harness |
| Ignition Wire (+) | Red/Light Blue |
| Ignition Wire Location | At Ignition Switch Harness |
| Second Ignition Wire (+) | Black/Light Green |
| Second Ignition Wire Location | At Ignition Switch Harness |
| Accessory Wire (+) | Gray/Yellow |
| Accessory Wire Location | At Ignition Switch Harness |
| Second Accessory Wire (+) | N/A |
| Second Accessory Wire Location | N/A |
| Starter Wire (+) | Red/Light Blue |
| Starter Wire Location | At Ignition Switch Harness |
| Second Starter Wire (+) | N/A |
| Second Starter Wire Location | N/A |
| Ground Wire | Chassis |
2004 Ford Ranger Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2004 Ford Ranger alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
| Application | Wire Color and Location |
|---|---|
| Brake Light Wire (+) | Light Green |
| Brake Light Wire Location | At Switch Above Brake Pedal |
| Dome Light Supervision Wire | Black/Light Blue |
| Dome Light Supervision Wire Location | At SJB (Smart Junction Box) located in the passenger kick panel. |
| Door Trigger Wire (+) | Yellow/Black and Gray/Red |
| Door Trigger Wire Location | At SJB (Smart Junction Box) located in the passenger kick panel. The yellow/black wire (-) is for the drivers door (large black plug, pin 6 at the SJB module) and the gray/red wire (-) is for the passenger door (small black plug, pin 3 of the SJB Module). When connecting to an alarm system, use both door trigger wires and diode isolate each wire. |
| Hood Pin Switch Wire (-) | N/A |
| Hood Pin Switch Wire Location | N/A |
| Horn Wire (-) | Yellow/Light Green to Dark Blue |
| Horn Wire Location | At SJB (Smart Junction Box) located in the passenger kick panel. |
| Key Sense Wire (+) | N/A |
| Key Sense Wire Location | N/A |
| Parking Light Wire (-) | White/Black |
| Parking Light Wire Location | At SJB (Smart Junction Box) located in the passenger kick panel. |
| Power Door Lock Wire (-) | Pink/Yellow |
| Power Door Lock Wire Location | At SJB (Smart Junction Box) located in the passenger kick panel. |
| Power Door Unlock Wire (-) | Pink/Light Green |
| Power Door Unlock Wire Location | At SJB (Smart Junction Box) located in the passenger kick panel. |
| Tachometer Wire (-) | Any Wire NOT Red |
| Tachometer Wire Location | At Any Fuel Injector |
| Trunk Pin Switch Wire (-) | N/A |
| Trunk Pin Switch Wire Location | N/A |
| Trunk Release Wire (-) | N/A |
| Trunk Release Wire Location | N/A |
| Factory Alarm Arm Wire (-) | N/A |
| Factory Alarm Arm Wire Location | N/A |
| Factory Alarm Disarm Wire (-) | N/A |
| Factory Alarm Disarm Wire Location | N/A |
| Factory Anti-Theft System | Ford Transponder Anti-Theft System |
| Factory Anti-Theft System Location | Transponder at Ignition Switch Tumbler |
| Factory Immobilizer Bypass | Requires Immobilizer Bypass Module |
Feel free to use any 2004 Ford Ranger alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2004 Ford Ranger car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2004 Ford Ranger.