2003 Acura CL Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2003 Acura CL alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | White |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Starter Positive Wire (+) | Black/White |
Starter Positive Wire Location | Ignition Switch Harness |
Ignition Positive Wire (+) | Black/Yellow |
Ignition Positive Wire Location | Ignition Switch Harness |
Second Ignition Positive Wire (+) | Yellow |
Second Ignition Positive Wire Location | Ignition Switch Harness |
Accessory Positive Wire (+) | White/Black |
Accessory Positive Wire Location | Ignition Switch Harness |
2003 Acura CL Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2003 Acura CL alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Negative Wire (-) | Red/Yellow |
Parking Light Negative Wire Location | At Headlight Switch |
Parking Light Positive Wire (+) | Red/Black |
Parking Light Positive Wire Location | At Top Of Passenger Fuse Box, 4-Pin Green Plug |
Power Door Lock Negative Wire (-) | Black/Blue (These wires are located in a blue or gray 22-pin connector in front of the passenger side fuse box. These wires will only test correctly while turning key in the passenger door key cylinder on the outside of the passenger door.) |
Power Door Lock Negative Wire Location | At Passenger Fuse Box |
Power Door Unlock Negative Wire (-) | Orange (These wires are located in a blue or gray 22-pin connector in front of the passenger side fuse box. These wires will only test correctly while turning key in the passenger door key cylinder on the outside of the passenger door.) |
Power Door Unlock Negative Wire Location | At Passenger Fuse Box |
Door Trigger Positive Wire (+) | Black/White (Requires Relay) |
Door Trigger Positive Wire Location | At Top Of Passenger Fuse Box, 4-Pin Green Plug |
Dome Light Supervision Wire | Use Door Trigger |
Dome Light Supervision Wire Location | N/A |
Trunk Release Positive Wire (+) | White (May Require Relay) |
Trunk Release Positive Wire Location | At Passenger MUX Module. The passenger MUX module is located behind the glove box. |
Horn Negative Negative Wire (-) | Light Green/Blue |
Horn Negative Negative Wire Location | At Steering Column Harness |
Tachometer Wire Negative Wire (-) | Blue |
Tachometer Wire Negative Wire Location | At Tach Test Connestor. The tachometer test connector is a 2-pin connector near the air intake on the drivers side shock tower. |
Brake Light Positive Wire (+) | White/Black |
Brake Light Positive Wire Location | At Switch Above Brake Pedal |
Factory Alarm Disarm Wire (-) | Black/Red To Blue |
Factory Alarm Disarm Wire Location | At Drivers Door Key Cylinder, In Drivers Door |
Factory Anti-Theft Wire (-) | Transponder Anti-Theft System, Requires Bypass Module And Extra Ignition Key. |
Factory Anti-Theft Wire Location | Transponder At Ignition Switch Tumbler. |
Feel free to use any 2003 Acura CL alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2003 Acura CL car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2003 Acura CL.