2000 GMC Envoy Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2000 GMC Envoy alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | Red |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Starter Positive Wire (+) | Yellow (+) |
Starter Positive Wire Location | Ignition Switch Harness |
Second Starter Positive Wire (+) | N/A |
Second Starter Positive Wire Location | N/A |
Ignition Positive Wire (+) | Pink |
Ignition Positive Wire Location | Ignition Switch Harness |
Second Ignition Positive Wire (+) | White (This wire must be connected as ignition #2 for remote starting.) |
Second Ignition Positive Wire Location | Ignition Switch Harness |
Third Ignition Positive Wire (+) | N/A |
Third Ignition Positive Wire Location | N/A |
Accessory Positive Wire (+) | Orange |
Accessory Positive Wire Location | Ignition Switch Harness |
Second Accessory Positive Wire (+) | N/A |
Second Accessory Positive Wire Location | N/A |
Key Sense Wire | N/A |
Key Sense Wire Location | N/A |
2000 GMC Envoy Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2000 GMC Envoy alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Negative Wire (-) | White |
Parking Light Negative Wire Location | At BCM, Light Blue Plug. The BCM (body control module) is located to the right of the gas pedal just below the radio. |
Parking Light Positive Wire (+) | Brown |
Parking Light Positive Wire Location | At BCM, Light Blue Plug. The BCM (body control module) is located to the right of the gas pedal just below the radio. |
Power Door Lock Positive Wire (+) | Light Blue |
Power Door Lock Positive Wire Location | At BCM, Brown Plug. The BCM (body control module) is located to the right of the gas pedal just below the radio. |
Power Door Unlock Positive Wire (+) | White |
Power Door Unlock Positive Wire Location | At BCM, Brown Plug. The BCM (body control module) is located to the right of the gas pedal just below the radio. |
Door Trigger Negative Wire (-) | This vehicle uses 3 door trigger wires, tan (-) for the driver side door, purple plug, pin B4, for the passengers door, orange (-) purple plug, pin B2, and a blue/white (-) in the light blue plug, pin B11 is for the rear doors and the rear hatch. When connecting an alarm use all 3 door trigger wires and diode isolate. To connect. |
Door Trigger Negative Wire Location | At BCM. The BCM (body control module) is located to the right of the gas pedal just below the radio. |
Dome Light Supervision Wire (-) | Tan |
Dome Light Supervision Wire Location | At BCM, Purple Plug, Pin B4. The BCM (body control module) is located to the right of the gas pedal just below the radio. |
Trunk Release Negative Wire (-) | Black |
Trunk Release Negative Wire Location | At BCM, Purple Plug. The BCM (body control module) is located to the right of the gas pedal just below the radio. |
Sliding Power Door Wire | N/A |
Sliding Power Door Wire Location | N/A |
Horn Negative Wire (-) | Black |
Horn Negative Wire Location | At Steering Column Harness |
Tachometer Wire Negative Wire (-) | White |
Tachometer Wire Negative Wire Location | At PCM. The PCM (power control module) is located on the passenger fender. On the 2.2L engine the tachometer wire is in a black 80 pin plug (pin #10) and on the 4.3L engine in a red 32-pin plug (pin# 20). |
Wait To Start Wire | N/A |
Wait To Start Location | N/A |
Brake Light Positive Wire (+) | White |
Brake Light Positive Wire Location | At Switch Above Brake Pedal |
Factory Alarm Disarm Wire (-) | Light Green |
Factory Alarm Disarm Wire Location | At BCM, Purple Plug. The BCM (body control module) is located to the right of the gas pedal just below the radio. |
Factory Anti-Theft System | Yellow (+), Orange/Black (-) And Red/White (Not Used) |
Factory Anti-Theft System Location | GM Passlock 2 System, These Wires Exit The Ignition Switch Tumbler Together And Are In The Main Ignition Switch Harness In The Column. |
Feel free to use any 2000 GMC Envoy alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2000 GMC Envoy car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2000 GMC Envoy.