1999 Jeep Wrangler Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 1999 Jeep Wrangler alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | Pink/Black and Red |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Starter Positive Wire (+) | Yellow |
Starter Positive Wire Location | Ignition Switch Harness |
Second Starter Positive Wire (+) | N/A |
Second Starter Positive Wire Location | N/A |
Ignition Positive Wire (+) | Dark Blue |
Ignition Positive Wire Location | Ignition Switch Harness |
Second Ignition Positive Wire (+) | N/A |
Second Ignition Positive Wire Location | N/A |
Third Ignition Positive Wire (+) | N/A |
Third Ignition Positive Wire Location | N/A |
Accessory Positive Wire (+) | Black/Orange |
Accessory Positive Wire Location | Ignition Switch Harness |
Second Accessory Positive Wire (+) | N/A |
Second Accessory Positive Wire Location | N/A |
Key Sense Wire | N/A |
Key Sense Wire Location | N/A |
1999 Jeep Wrangler Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 1999 Jeep Wrangler alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Negative Wire (-) | N/A |
Parking Light Negative Wire Location | N/A |
Parking Light Positive Wire (+) | Black/Yellow |
Parking Light Positive Wire Location | At Headlight Switch |
Power Door Lock Negative Wire (-) | Add Actuators |
Power Door Lock Negative Wire Location | To Both Doors |
Power Door Unlock Negative Wire (-) | Add Actuators |
Power Door Unlock Negative Wire Location | To Both Doors |
Door Trigger Negative Wire (-) | Yellow |
Door Trigger Negative Wire Location | At Headlight Switch |
Dome Light Supervision Wire (-) | Use Door Trigger, Requires Relay |
Dome Light Supervision Wire Location | N/A |
Trunk Release Negative Wire (-) | N/A |
Trunk Release Negative Wire Location | N/A |
Sliding Power Door Wire | N/A |
Sliding Power Door Wire Location | N/A |
Horn Negative Wire (-) | Red/Yellow |
Horn Negative Wire Location | At Steering Column Harness |
Tachometer Wire Negative Wire (-) | Gray |
Tachometer Wire Negative Wire Location | At Ignition Coil |
Wait To Start Wire | N/A |
Wait To Start Location | N/A |
Brake Light Positive Wire (+) | White/Tan |
Brake Light Positive Wire Location | At Switch Above Brake Pedal |
Factory Alarm Disarm Wire (-) | N/A |
Factory Alarm Disarm Wire Location | N/A |
Factory Anti-Theft System | Chrysler’s Sentry Key (Gray Key Only) A Transponder System |
Factory Anti-Theft System Location | Transponder At Ignition Switch Tumbler |
Feel free to use any 1999 Jeep Wrangler alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 1999 Jeep Wrangler car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 1999 Jeep Wrangler.
2 thoughts on “1999 Jeep Wrangler Car Alarm Wiring Diagram”
Lee, some alarm systems have external shock sensors which can be adjusted externally. Some alarm systems have built in shock sensors which can only be adjusted via alarm programming. If you have never adjusted or programmed your alarm system before, our advice is that you take your car to an experienced alarm installer. It should not take more than 30 minutes from start to finish to adjust it. Hope this helps. Good luck with your 1999 Jeep Wrangler shock sensor adjustment.
The alarm is to sensitive always going off. How do I disable it from my key pad?