1998 Toyota Tercel Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 1998 Toyota Tercel alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | White/Red and Black/Red |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Starter Positive Wire (+) | Black (There are (2) black wires in the ignition harness. One is the starter crank wire, and the other wire is an airbag wire. Test with a digital voltmeter “only” to identify the correct wire, the correct wire will only show (+) 12 volts when the ignition key is held in the cranking position this will be the starter/crank wire. If you test the wrong wire with a test light of any kind “computer friendly test light” or not, the airbag light will turn on and will need to be reset by a Toyota dealer.) |
Starter Positive Wire Location | Ignition Switch Harness |
Ignition Positive Wire (+) | Red/Blue |
Ignition Positive Wire Location | Ignition Switch Harness |
Second Ignition Positive Wire (+) | Black/White |
Second Ignition Positive Wire Location | Ignition Switch Harness |
Accessory Positive Wire (+) | Black/Yellow |
Accessory Positive Wire Location | Ignition Switch Harness |
1998 Toyota Tercel Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 1998 Toyota Tercel alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Negative Wire (-) | Light Green |
Parking Light Negative Wire Location | At Steering Column Harness |
Parking Light Positive Wire (+) | Green |
Parking Light Positive Wire Location | In Drivers Kick Panel |
Power Door Lock Negative Wire (-) | Green/White |
Power Door Lock Negative Wire Location | In Passenger Kick Panel |
Power Door Unlock Negative Wire (-) | Red/White |
Power Door Unlock Negative Wire Location | In Passenger Kick Panel |
Door Trigger Negative Wire (-) | Red/White |
Door Trigger Negative Wire Location | In Drivers Kick Panel |
Dome Light Supervision Wire | Use Door Trigger (Requires Relay) |
Dome Light Supervision Wire Location | N/A |
Horn Negative Negative Wire (-) | Green/Yellow |
Horn Negative Negative Wire Location | At Steering Column Harness |
Tachometer Wire Negative Wire (-) | Black/Blue |
Tachometer Wire Negative Wire Location | At Diagnostic Connector. The diagnostic connector is located in the left rear corner of the engine compartment. The tachometer is also found at the igniter. |
Brake Light Positive Wire (+) | Red/White |
Brake Light Positive Wire Location | At Switch Above Brake Pedal |
Factory Alarm Disarm Wire (-) | Disarms With Unlock |
Factory Alarm Disarm Wire Location | N/A |
Factory Anti-Theft Wire (-) | N/A |
Factory Anti-Theft Wire Location | N/A |
Feel free to use any 1998 Toyota Tercel alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 1998 Toyota Tercel car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 1998 Toyota Tercel.
2 thoughts on “1998 Toyota Tercel Car Alarm Wiring Diagram”
Sue, as much as we would like to help you, not all car alarms are installed the same way. Different brands and different setups will call for different wiring. Our advice is to take your car to a qualified alarm installer and ask them to remove the alarm because it does take some wiring knowledge and experience to know what to remove. Hope this helps. Good luck on your alarm removal.
my 98 toyota tacoma got the battery jumped for the first time since i bought it (used 5 years ago). Afterwards, the alarm system was activated and i can’t disable it. i had no idea there was an alarm system even in the car. it goes off when the door opens or when i hit a bump, and every few minutes. what a pain! any idea how to disable the alarm?!