MODIFIEDLIFE

1998 Infiniti I30 Auto Alarm Wiring Diagram


Whether your an expert Infiniti I30 car alarm installer, Infiniti I30 performance fan or a novice Infiniti I30 enthusiast with a 1998 Infiniti I30, a Infiniti I30 car alarm wiring diagram can save yourself a lot of time. One of the most time consuming tasks with installing an after market car alarm, car security, car remote start, automatic remote starter, shock sensor, tilt sensor, car alarm sensor or any auto alarm is identifying the correct color car security wires for a 1998 Infiniti I30 headlight bulb size you need for your low beam or high beam and save time. Also, find your other car light bulb sizes including your fog light, reverse light, turn signal, brake light and more. It’s that easy!

The Modified Life staff has taken all its Infiniti I30 car alarm wiring diagrams, Infiniti I30 car security wiring diagrams, Infiniti I30 car alarm wire diagrams, Infiniti I30 car security wiring schematics, Infiniti I30 car security diagrams, Infiniti I30 remote starter wiring diagrams and cataloged them online for our visitors to use for free. Our automotive wiring diagrams allow you to enjoy your new auto security electronics rather than spend countless hours trying to figure out which wires goes where.

Feel free to use any Infiniti I30 auto alarm wiring diagram that is listed on Modified Life but keep in mind that all information here is provided as-is without any warranty of any kind and most of the auto security wiring diagrams listed on our enthusiast website are submitted by the Modified Life community. Use of the wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 1998 Infiniti I30.

Questions

If you have any questions pertaining to the car wiring in a 1998 Infiniti I30, please feel free to post it at the bottom of this page and either we will do our best to find you the information you need or hopefully someone in the Modified Life community will have the information you are looking for.

Request a Car Alarm Wiring Diagram

If you can not find your car alarm wiring, car security wire diagram or auto alarm wire diagram on Modified Life, please feel free to post a car alarm wiring diagram request on this page and we will do our best to find you the diagram, schematic or information you need for your mobile security installation.

Adding More Information

If you would like to help the Modified Life community by adding a car security wire schematic, car alarm wire diagram, car remote starter wire diagram, auto remote starter wire diagram or auto security wire diagram to our resource, please feel free to post any additional car wiring information about the 1998 Infiniti I30 on this page.

1998 Infiniti I30 Auto Alarm Wiring Instructions

Battery Constant 12v+ Positive Wire (+): White/Red Or White/Purple
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness

Starter Positive Wire (+): Black/Yellow Or Black/White (When installing a remote starter, you must use both starter #1 and starter #2 wires. Both wires must be connected to the starter/cranking output wire from the remote starter or the vehicle will not remote start when the engine is cold.)
Starter Positive Wire Location: Ignition Switch Harness

Second Starter Positive Wire (+): Green/Black Or Red/Blue (When installing a remote starter, you must use both starter #1 and starter #2 wires. Both wires must be connected to the starter/cranking output wire from the remote starter or the vehicle will not remote start when the engine is cold.)
Second Starter Positive Wire Location: Ignition Switch Harness

Ignition Positive Wire (+): Black/White Or Black/Red
Ignition Positive Wire Location: Ignition Switch Harness

Second Ignition Positive Wire (+): N/A
Second Ignition Positive Wire Location: N/A

Third Ignition Positive Wire (+): N/A
Third Ignition Positive Wire Location: N/A

Accessory Positive Wire (+): Red/Yellow Or Red
Accessory Positive Wire Location: Ignition Switch Harness

Second Accessory Positive Wire (+): Blue Or White/Blue
Second Accessory Positive Wire Location: Ignition Switch Harness

Key Sense Wire: N/A
Key Sense Wire Location: N/A

Parking Light Negative Wire (-): N/A
Parking Light Negative Wire Location: N/A

Parking Light Positive Wire (+): Red/Green
Parking Light Positive Wire Location: At Steering Column Harness

Power Door Lock Negative Wire (-): Light Green/Red
Power Door Lock Negative Wire Location: In Drivers Door At Lock Switch

Power Door Unlock Negative Wire (-): Green/Yellow (Requires a Double Pulse)
Power Door Unlock Negative Wire Location: In Drivers Door At Lock Switch

Door Trigger Negative Wire (-): Red/White
Door Trigger Negative Wire Location: Low In Driver Kick Panel

Dome Light Supervision Wire (-): Use Door Trigger (Requires Relay)
Dome Light Supervision Wire Location: N/A

Trunk Release Negative Wire (-): Purple/Yellow (Requires Relay)
Trunk Release Negative Wire Location: Low In Drivers Kick Panel

Sliding Power Door Wire: N/A
Sliding Power Door Wire Location: N/A

Horn Negative Wire (-): Green/White
Horn Negative Wire Location: At Steering Column Harness

Tachometer Wire Negative Wire (-): White/Green
Tachometer Wire Negative Wire Location: At ECM Module (ECM module (electronic control module) is located in the front of the center console on the transmission hump . The wiring is easily reached by removing the small black panel right in the front of the center console on the passenger side. The wire is in middle row , 7th wire from the left.)

Wait To Start Wire: N/A
Wait To Start Location: N/A

Brake Light Positive Wire (+): Red/Green
Brake Light Positive Wire Location: At Switch Above Brake Pedal

Factory Alarm Disarm Wire (-): Disarms With Unlock, Single Pulse Disarms
Factory Alarm Disarm Wire Location: N/A

Factory Anti-Theft System: N/A
Factory Anti-Theft System Location: N/A

The 1998 Infiniti I30 alarm wire color and location information above is updated as it is submitted by the Modified Life community.

Leave a Comment

Your email address will not be published. Required fields are marked *