MODIFIEDLIFE

1998 Acura Integra Automotive Alarm Wiring Diagram

1998 Acura Integra Alarm Wires

Find the right alarm wire colors, locations, and polarity with this 1998 Acura Integra alarm wiring diagram. This will help you install your car alarm wiring correctly.

Application Wire Color and Location
Battery Constant 12v+ Positive Wire (+) White
Battery Constant 12v+ Positive Wire Location Ignition Switch Harness
Starter Positive Wire (+) Black/White
Starter Positive Wire Location Ignition Switch Harness
Ignition Positive Wire (+) Black/Yellow
Ignition Positive Wire Location Ignition Switch Harness
Accessory Positive Wire (+) Yellow
Accessory Positive Wire Location Ignition Switch Harness

1998 Acura Integra Alarm Sensor Wires

Find the right alarm sensor wire colors, locations, and polarity with this 1998 Acura Integra alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.

Application Wire Color and Location
Parking Light Positive Wire (+) Red/Black
Parking Light Positive Wire Location At Green Plug Above Fuse Box Or Male Blade Terminal In Fuse Box
Power Door Lock Negative Wire (-) Black/White (These wires are in the large of the 2 gray plugs in the lower drivers kick near the firewall. If vehicle is equipped with a cruise control, these plugs are behind this module. You must remove this module to access these plugs. Wires will only test with the passenger door lock switch.)
Power Door Lock Negative Wire Location In Drivers Kick Panel
Power Door Unlock Negative Wire (-) Black/Red (These wires are in the large of the 2 gray plugs in the lower drivers kick near the firewall. If vehicle is equipped with a cruise control, these plugs are behind this module. You must remove this module to access these plugs. Wires will only test with the passenger door lock switch.)
Power Door Unlock Negative Wire Location In Drivers Kick Panel
Door Trigger Negative Wire (-) Light Green/Red (May Require Relay)
Door Trigger Negative Wire Location In Drivers Kick Panel. This wire is in the larger of the 2 gray plugs in the lower drivers kick near the firewall. If vehicle is equipped with a cruise control, these plugs are behind this module. You must remove this module to access these plugs. This blue tachometer wire is also located in a 16-pin white or gray plug to the left of the fuse box.
Dome Light Supervision Wire Use Door Trigger
Dome Light Supervision Wire Location N/A
Trunk Release Negative Wire (-) Blue (Requires Relay)
Trunk Release Negative Wire Location At Hatch Release Switch. The hatch release only operates when the doors are unlocked.
Horn Negative Negative Wire (-) Gray (-) Or Blue/Green (-)
Horn Negative Negative Wire Location At Steering Column Harness
Tachometer Wire Negative Wire (-) Blue
Tachometer Wire Negative Wire Location At Tach Test Connector. The tachometer test connector is a 2 pin connector in the drivers side rear corner of the engine compartment.
Brake Light Positive Wire (+) Green/White
Brake Light Positive Wire Location At Switch Above Brake Pedal
Factory Alarm Disarm Wire (-) Disarms With Factory Remote Only.
Factory Alarm Disarm Wire Location N/A
Factory Anti-Theft Wire (-) N/A
Factory Anti-Theft Wire Location N/A

Feel free to use any 1998 Acura Integra alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 1998 Acura Integra car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 1998 Acura Integra.

Modified Life is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn how it works.

2 thoughts on “1998 Acura Integra Automotive Alarm Wiring Diagram”

Leave a Comment

Your email address will not be published. Required fields are marked *