MODIFIEDLIFE

1996 Nissan 240SX Automotive Alarm Wiring Diagram

1996 Nissan 240SX Alarm Wires

Find the right alarm wire colors, locations, and polarity with this 1996 Nissan 240SX alarm wiring diagram. This will help you install your car alarm wiring correctly.

Application Wire Color and Location
Battery Constant 12v+ Positive Wire (+) White
Battery Constant 12v+ Positive Wire Location Ignition Switch Harness
Starter Positive Wire (+) Black/Yellow (When installing a remote starter, you must use both starter #1 and starter #2 wires. Both wires must be connected to the starter/cranking output wire from the remote starter or the vehicle will not remote start when the engine is cold.)
Starter Positive Wire Location Ignition Switch Harness
Secondary Starter Positive Wire (+) Black/White (When installing a remote starter, you must use both starter #1 and starter #2 wires. Both wires must be connected to the starter/cranking output wire from the remote starter or the vehicle will not remote start when the engine is cold.)
Secondary Starter Positive Wire Location Ignition Switch Harness
Ignition Positive Wire (+) Black/Red
Ignition Positive Wire Location Ignition Switch Harness
Accessory Positive Wire (+) White (When installing a remote starter to this vehicle, an extra relay is needed to isolate the accessory wire.)
Accessory Positive Wire Location Ignition Switch Harness

1996 Nissan 240SX Alarm Sensor Wires

Find the right alarm sensor wire colors, locations, and polarity with this 1996 Nissan 240SX alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.

Application Wire Color and Location
Parking Light Positive Wire (+) Red/Blue
Parking Light Positive Wire Location At Steering Column Harness
Power Door Lock Negative Wire (-) Light Green/White
Power Door Lock Negative Wire Location At Anti-Theft Module. When installing a remote starter, you must use both starter #1 and starter #2 wires. Both wires must be connected to the starter/cranking output wire from the remote starter or the vehicle will not remote start when the engine is cold.
Power Door Unlock Negative Wire (-) Brown
Power Door Unlock Negative Wire Location At Anti-Theft Module. When installing a remote starter, you must use both starter #1 and starter #2 wires. Both wires must be connected to the starter/cranking output wire from the remote starter or the vehicle will not remote start when the engine is cold.
Door Trigger Negative Wire (-) Red/White
Door Trigger Negative Wire Location In Drivers Kick Panel
Dome Light Supervision Wire Use Door Trigger (Requires Relay)
Dome Light Supervision Wire Location N/A
Horn Negative Negative Wire (-) Yellow/Green
Horn Negative Negative Wire Location At Anti-Theft Module. The anti-theft module is located just above hood release cable, in the drivers kick panel.
Tachometer Wire Negative Wire (-) Yellow/Red
Tachometer Wire Negative Wire Location At ECM, In Passenger Kick Panel
Brake Light Positive Wire (+) Red/Green
Brake Light Positive Wire Location At Switch Above Brake Pedal
Factory Alarm Disarm Wire (-) Green/Yellow
Factory Alarm Disarm Wire Location At Anti-Theft Module. When installing a remote starter, you must use both starter #1 and starter #2 wires. Both wires must be connected to the starter/cranking output wire from the remote starter or the vehicle will not remote start when the engine is cold.
Factory Anti-Theft Wire (-) N/A
Factory Anti-Theft Wire Location N/A

Feel free to use any 1996 Nissan 240SX alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 1996 Nissan 240SX car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 1996 Nissan 240SX.

Modified Life is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn how it works.

Leave a Comment

Your email address will not be published. Required fields are marked *