Whether your an expert installer or a novice enthusiast with a 2000 Mitsubishi Eclipse, an automotive wiring diagram can save yourself time and headaches. One of the most time consuming tasks with installing a car alarm, remote car starter, car security system or any mobile electronics is identifying the correct wires for a 2000 Mitsubishi Eclipse.

The Modified Life staff has put their heads together to create an invaluable resource containing car alarm wiring diagram, remote car starter wiring diagram, car wiring diagram and car security wiring diagram. Feel free to use any car alarm wiring diagram or remote car starter wiring diagram that is listed on Modified Life but keep in mind that all information here is provided “as is” without any warranty of any kind. Use of the wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 2000 Mitsubishi Eclipse.

2000 Mitsubishi Eclipse Car Alarm and Remote Car Starter Wiring Information

Constant 12V+ Wire: White/Red
Constant 12V+ Wire Location: Ignition Switch Harness

Starter Wire (+): Black/Red
Starter Wire Location: Ignition Switch Harness

Ignition Wire (+): Dark Green
Ignition Wire Location: Ignition Switch Harness

2nd Ignition Wire: N/A
2nd Ignition Wire Location: N/A

Accessory Wire: Blue/Red
Accessory Wire Location: Ignition Switch Harness

Second Accessory Wire: Blue/Black
Accessory Wire Location: Ignition Switch Harness

Door Lock Wire (-): Light Green/Black (These are the door key cylinder wires. Meter the wires while turning the key in the drivers door. Unlock requires a double pulse. On vehicles without the factory alarm use purple for lock and light green/red for unlock, these are the door lock switch wires.)
Door Lock Wire Location: Driver Kick Panel (Located in a black 32 pin plug.)

Door Unlock Wire (-): Orange (These are the door key cylinder wires. Meter the wires while turning the key in the drivers door. Unlock requires a double pulse. On vehicles without the factory alarm use purple for lock and light green/red for unlock, these are the door lock switch wires.)
Door Unlock Wire Location: Driver Kick Panel (Located in a black 32 pin plug.)

Door Trigger Wire (-): Green/Yellow
Door Trigger Wire Location: Fuse Box (Located in a black 19 pin plug on the back of the fuse box under the driver side dash.)

Dome Supervision Wire: Green/Orange
Dome Supervision Wire Location: Fuse Box (In the plug on the upper right side of the fuse box under the driver side dash.)

Tachometer Wire: Use Test Connector
Tachometer Wire Location: Go to the test connector inside the fusebox under the hood, it is a T shaped plug. Tach is the terminal on the top left of the T, the wire under the terminal is white or white/red.

Headlights Wire (-): Orange
Headlights Wire Location: Headlight relay under hood.

Parking Light Positive Wire (+): Green/White or Pink/Black
Parking Light Positive Wire Location: Low in Driver Kick Panel

Parking Light Negative Wire (-): N/A
Parking Light Negative Wire Location: N/A

Trunk/Hatch Pin Wire (-): Red
Trunk/Hatch Pin Wire Location: Driver Kick Panel (Located in a white 43 pin plug.)

Hood Pin Wire (-): N/A
Hood Pin Wire Location: N/A

Trunk/Hatch Release Wire (+): Green/White
Trunk/Hatch Release Wire Location: Drivers Kick Panel (Located in a white 43 pin plug.)

Factory Alarm Arm Wire: Arms with Lock
Factory Alarm Arm Wire Location: N/A

Factory Alarm Disarm Wire (-): Disarms with Unlock
Factory Alarm Disarm Wire Location: N/A

Horn Trigger Wire (-): Light Green/Black
Horn Trigger Wire Location: Steering Column

Brake Wire (+): Green/Orange
Brake Wire Location: Brake Pedal Switch

Make Your Car Alarm Installation Easy with these Tools and Accessories
Save Up to 60% Off Car Alarms and Auto Security