Whether your an expert installer or a novice enthusiast with a 1998 Toyota Camry, an automotive wiring diagram can save yourself time and headaches. One of the most time consuming tasks with installing a car alarm, remote car starter, car security system or any mobile electronics is identifying the correct wires for a 1998 Toyota Camry.

The Modified Life staff has put their heads together to create an invaluable resource containing car alarm wiring diagram, remote car starter wiring diagram, car wiring diagram and car security wiring diagram. Feel free to use any car alarm wiring diagram or remote car starter wiring diagram that is listed on Modified Life but keep in mind that all information here is provided “as is” without any warranty of any kind. Use of the wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 1998 Toyota Camry.

If you can’t find your car alarm wiring diagram or remote start wire diagram on Modified Life, please feel free to post a car wiring diagram request (Car Alarm Wiring Diagram Request Page) and we’ll do our best to find you the information you need for your mobile installation.

1998 Toyota Camry Car Alarm and Remote Car Starter Wiring Information

Constant 12V+ Wire: White, White/Red
Constant 12V+ Wire Location: Ignition Switch Harness

Starter Wire (+): Red
Starter Wire Location: Ignition Switch Harness

Second Starter Wire (+): N/A
Start Wire Location: N/A

Ignition Wire (+): Black/Yellow
Ignition Wire Location: Ignition Switch Harness

Second Ignition Wire: Black/Red (There are two black/red wires going to the same pin at the plug. use either one.)
Second Ignition Wire Location: Ignition Switch Harness

Accessory Wire: Orange & Brown
Accessory Wire Location: Ignition Switch Harness

Second Accessory Wire: N/A
Accessory Wire Location: N/A

Tachometer Wire: Black or Gray
Tachometer Wire Location: On the 4 cylinder motor use the black wire in the gray plug at the coil on the drivers side of the motor. On the 6 cylinder motor use the gray wire located at the ignitor on a bracket just in front of the strut tower. The module says “Denso” on it.

Door Lock Wire (-): Dark Blue/White (The lock wires are about 18 gauge. They will test only by operating the key in the passenger door lock cylinder, not the rocker switch on the door itself.)
Door Lock Wire Location: Orange plug bottom of fusebox.

Door Unlock Wire (-): Dark Blue (The lock wires are about 18 gauge. They will test only by operating the key in the passenger door lock cylinder, not the rocker switch on the door itself.)
Door Unlock Wire Location: Orange plug bottom of fusebox.

Door Trigger Wire (-): Red/White
Door Trigger Wire Location: Top of fuse box. (Located in a seven pin plug on the top right side of the fuse box.)

Dome Supervision Wire: N/A
Dome Supervision Wire Location: N/A

Headlights Wire (-): Red/Yellow
Headlights Wire Location: Steering Column

Parking Light Positive Wire (+): Green
Parking Light Positive Wire Location: Bottom of fusebox. (In a white connector just below the fuses with the wires exiting out toward you.)

Parking Light Negative Wire (-): Green
Parking Light Negative Wire Location: Steering Column

Trunk/Hatch Pin Wire (-): Red/Yellow
Trunk/Hatch Pin Wire Location: Use light or switch in trunk.

Hood Pin Wire (-): N/A
Hood Pin Wire Location: N/A

Trunk/Hatch Release Wire (-): N/A
Trunk/Hatch Release Wire Location: N/A

Factory Alarm Arm Wire: Arms with lock.
Factory Alarm Arm Wire Location: N/A

Factory Alarm Disarm Wire (-): Disarms with lock.
Factory Alarm Disarm Wire Location: N/A

Horn Trigger Wire (-): Green/Black
Horn Trigger Wire Location: Steering Column

Brake Wire (+): Green/White
Brake Wire Location: Brake pedal switch or bottom of fusebox. (In a white connector just below the fuses with the wires exiting out toward you.)

Make Your Car Alarm Installation Easy with these Tools and Accessories
Save Up to 60% Off Car Alarms and Auto Security