Whether your an expert Isuzu Ascender car alarm installer, Isuzu Ascender performance fan or a novice Isuzu Ascender enthusiast with a 2007 Isuzu Ascender, a 2007 Isuzu Ascender car alarm wiring diagram can save yourself a lot of time. One of the most time consuming tasks with installing an after market car alarm, car security, car remote start, automatic remote starter, shock sensor, tilt sensor, car alarm sensor or any auto alarm is identifying the correct color car security wires for a 2007 Isuzu Ascender.

The Modified Life staff has taken all its Isuzu Ascender car alarm wiring diagrams, Isuzu Ascender car security wiring diagrams, Isuzu Ascender car alarm wire diagrams, Isuzu Ascender car security wiring schematics, Isuzu Ascender car security diagrams, Isuzu Ascender remote starter wiring diagrams and cataloged them online for our visitors to use for free. Our automotive wiring diagrams allow you to enjoy your new auto security electronics rather than spend countless hours trying to figure out which wires goes where.

Feel free to use any Isuzu Ascender auto alarm wiring diagram that is listed on Modified Life but keep in mind that all information here is provided as-is without any warranty of any kind and most of the auto security wiring diagrams listed on our enthusiast website are submitted by the Modified Life community. Use of the wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 2007 Isuzu Ascender.

Questions

If you have any questions pertaining to the car wiring in a 2007 Isuzu Ascender, please feel free to post it at the bottom of this page and either we will do our best to find you the information you need or hopefully someone in the Modified Life community will have the information you are looking for.

Request a Car Alarm Wiring Diagram

If you can not find your car alarm wiring, car security wire diagram or auto alarm wire diagram on Modified Life, please feel free to post a car alarm wiring diagram request on this page and we will do our best to find you the diagram, schematic or information you need for your mobile security installation.

Adding More Information

If you would like to help the Modified Life community by adding a car security wire schematic, car alarm wire diagram, car remote starter wire diagram, auto remote starter wire diagram or auto security wire diagram to our resource, please feel free to post any additional car wiring information about the 2007 Isuzu Ascender on this page.

2007 Isuzu Ascender Car Alarm Wiring Diagram

Battery Constant 12v+ Positive Wire (+): Red And Red/White
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness

Starter Positive Wire (+): Yellow
Starter Positive Wire Location: Ignition Switch Harness

Second Starter Positive Wire (+): N/A
Second Starter Positive Wire Location: N/A

Ignition Positive Wire (+): Pink
Ignition Positive Wire Location: Ignition Switch Harness

Second Ignition Positive Wire (+): White (This wire must be connected as ignition #2 for remote starting.)
Second Ignition Positive Wire Location: Ignition Switch Harness

Third Ignition Positive Wire (+): N/A
Third Ignition Positive Wire Location: N/A

Accessory Positive Wire (+): Orange
Accessory Positive Wire Location: Ignition Switch Harness

Second Accessory Positive Wire (+): N/A
Second Accessory Positive Wire Location: N/A

Key Sense Wire: N/A
Key Sense Wire Location: N/A

Parking Light Negative Wire (-): Gray/Black
Parking Light Negative Wire Location: At BCM, Tan Plug, Pin E3. The BCM is attached to the fuse box under the left rear seat.

Parking Light Positive Wire (+): Brown
Parking Light Positive Wire Location: At Fuse Box Under Left Rear Seat

Power Door Lock Negative Wire (-): This vehicle uses a special multiplex type door locking system that will require extra relays to do the door locks and rear hatch release.
Power Door Lock Negative Wire Location: N/A

Power Door Unlock Negative Wire (-): Same Wire as Above. This vehicle uses a special multiplex type door locking system that will require extra relays to do the door locks and rear hatch release.
Power Door Unlock Negative Wire Location: N/A

Door Trigger Positive Wire (+): Gray/Black
Door Trigger Positive Wire Location: At Fusebox, Under Left Rear Seat

Domelight Supervision Wire: Turns On With Unlock
Domelight Supervision Wire Location: N/A

Trunk Release Negative Wire (-): N/A
Trunk Release Negative Wire Location: N/A

Sliding Power Door Wire: N/A
Sliding Power Door Wire Location: N/A

Horn Negative Wire (-): Black/Yellow To Black
Horn Negative Wire Location: At BCM, Tan Plug, Pin E12. The BCM is attached to the fuse box under the left rear seat.

Tachometer Wire Negative Wire (-): White
Tachometer Wire Negative Wire Location: At PCM, Blue Plug, Pin 49. The PCM is attached to the driver side of the engine.

Wait To Start Wire: N/A
Wait To Start Location: N/A

Brake Light Positive Wire (+): White
Brake Light Positive Wire Location: At Switch Above Brake Pedal

Factory Alarm Disarm Wire (-): Light Green
Factory Alarm Disarm Wire Location: At Drivers Door Module In Drivers Door

Factory Anti-Theft System: Yellow (+), Orange/Black (-) And Red/White (Not Used)
Factory Anti-Theft System Location: GM Passlock 2 System, These Wires Exit The Ignition Switch Tumbler Together And Are In The Main Ignition Switch Harness In The Column.

The 2007 Isuzu Ascender alarm wire color information above is updated as it is submitted by the Modified Life community.

Make Your Car Alarm Installation Easy with these Tools and Accessories
Save Up to 60% Off Car Alarms and Auto Security