2007 Ford Crown Victoria Car Alarm Wire Colors

2007 Ford Crown Victoria Car Alarm Wire Colors

Whether your an expert Ford Crown Victoria car alarm installer, Ford Crown Victoria performance fan or a novice Ford Crown Victoria enthusiast with a 2007 Ford Crown Victoria, a Ford Crown Victoria car alarm wiring diagram can save yourself a lot of time. One of the most time consuming tasks with installing an after market car alarm, car security, car remote start, automatic remote starter, shock sensor, tilt sensor, car alarm sensor or any auto alarm is identifying the correct color car security wires for a 2007 Ford Crown Victoria.

The Modified Life staff has taken all its Ford Crown Victoria car alarm wiring diagrams, Ford Crown Victoria car security wiring diagrams, Ford Crown Victoria car alarm wire diagrams, Ford Crown Victoria car security wiring schematics, Ford Crown Victoria car security diagrams, Ford Crown Victoria remote starter wiring diagrams and cataloged them online for our visitors to use for free. Our automotive wiring diagrams allow you to enjoy your new auto security electronics rather than spend countless hours trying to figure out which wires goes where.

Feel free to use any Ford Crown Victoria auto alarm wiring diagram that is listed on Modified Life but keep in mind that all information here is provided “as is” without any warranty of any kind and most of the auto security wiring diagrams listed on our enthusiast website are submitted by the Modified Life community. Use of the wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 2007 Ford Crown Victoria.

Questions

If you have any questions pertaining to the car wiring in a 2007 Ford Crown Victoria, please feel free to post it at the bottom of this page and either we’ll do our best to find you the information you need or hopefully someone in the Modified Life community will have the information you are looking for.

Request a Car Alarm Wiring Diagram

If you can’t find your car alarm wiring, car security wire diagram or auto alarm wire diagram on Modified Life, please feel free to post a car alarm wiring diagram request on this page and we’ll do our best to find you the diagram, schematic or information you need for your mobile security installation.

Adding More Information

If you would like to help the Modified Life community by adding a car security wire schematic, car alarm wire diagram, car remote starter wire diagram, auto remote starter wire diagram or auto security wire diagram to our resource, please feel free to post any additional car wiring information about the 2007 Ford Crown Victoria on this page.

2007 Ford Crown Victoria Car Alarm Wire Colors

Battery Constant 12v+ Positive Wire (+): Red and Light Green/Purple
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness

Starter Positive Wire (+): Dark Green
Starter Positive Wire Location: Ignition Switch Harness

Ignition Positive Wire (+): Purple/Orange
Ignition Positive Wire Location: Ignition Switch Harness

Second Ignition Positive Wire (+): Gray/Yellow
Second Ignition Positive Wire Location: Ignition Switch Harness

Accessory Positive Wire (+): White/Light Blue
Accessory Positive Wire Location: Ignition Switch Harness

Second Accessory Positive Wire (+): White/Purple
Second Accessory Positive Wire Location: Ignition Switch Harness

Parking Light Negative Wire (-): White/Black
Parking Light Negative Wire Location: At LCM, Gray 16-Pin Plug, Pin 13. If vehicle is equipped with a factory keyless entry system, then the vehicle has a positive (+) door locking system, vehicles without factory keyless entry, have a 5 wire reverse polarity door locking system. Vehicles with the key pad on the door is considered to have keyless entry.

Parking Light Positive Wire (+): Brown
Parking Light Positive Wire Location: At LCM, Black 16-Pin Plug, Pin 4. If vehicle is equipped with a factory keyless entry system, then the vehicle has a positive (+) door locking system, vehicles without factory keyless entry, have a 5 wire reverse polarity door locking system. Vehicles with the key pad on the door is considered to have keyless entry.

Power Door Lock Negative Wire (-): Pink/Yellow (5 Wire Reverse Polarity). If vehicle is equipped with a factory keyless entry system, then the vehicle has a positive (+) door locking system, vehicles without factory keyless entry, have a 5 wire reverse polarity door locking system. Vehicles with the key pad on the door is considered to have keyless entry.
Power Door Lock Negative Wire Location: In Drivers Kick Panel At Door Harness

Power Door Unlock Negative Wire (-): Pink/Light Green (5 Wire Reverse Polarity). If vehicle is equipped with a factory keyless entry system, then the vehicle has a positive (+) door locking system, vehicles without factory keyless entry, have a 5 wire reverse polarity door locking system. Vehicles with the key pad on the door is considered to have keyless entry.
Power Door Unlock Negative Wire Location: In Drivers Kick Panel At Door Harness

Door Trigger Negative Wire (-): Dark Blue and Black/Orange (Use Both). The driver’s door is a dark blue (-) in the gray 22-pin plug, pin 11, the orange/black (-) covers all other doors and is in a gray 16-pin plug, pin 11. When connecting to an alarm system use both door trigger wires and diode isolate to connect.
Door Trigger Negative Wire Location: At LCM. The LCM (lighting control module) is located to the right of the steering column.The driver’s door is a dark blue (-) in the gray 22-pin plug, pin 11, the orange/black (-) covers all other doors and is in a gray 16-pin plug, pin 11. When connecting to an alarm system use both door trigger wires and diode isolate to connect.

Domelight Supervision Wire (+): Black/Light Blue (Requires Relay)
Domelight Supervision Wire Location: At LCM, Black 16-Pin Plug, Pin 11. The LCM (lighting control module) is located to the right of the steering column.

Trunk Release Negative Wire (-): Purple/Yellow (5-Wire) (Requires Relay). The trunk release system on this vehicle uses a 5-wire circuit and will require an extra relay to connect.
Trunk Release Negative Wire Location: In Drivers Kick Panel, In Harness To Rear Of Vehicle

Horn Negative Wire (-): Dark Blue
Horn Negative Wire Location: At LCM, Gray 22-Pin Plug, Pin 4. The LCM (lighting control module) is located to the right of the steering column.

Tachometer Wire Negative Wire (-): Any Wire Not Red Or White/Red
Tachometer Wire Negative Wire Location: At Any Fuel-Injector Or Ignition Coil

Brake Light Positive Wire (+): Light Green/Red
Brake Light Positive Wire Location: At Switch Above Brake Pedal

Factory Alarm Disarm Wire (-): N/A
Factory Alarm Disarm Wire Location: N/A

Factory Anti-Theft System: Ford’s Securilock Anti-Theft Transponder System
Factory Anti-Theft System Location: Transponder At Ignition Switch Tumbler

Leave a Reply

Your email address will not be published. Required fields are marked *

nine + nine =