1999 Acura CL Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 1999 Acura CL alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | White |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Starter Positive Wire (+) | Black/White |
Starter Positive Wire Location | Ignition Switch Harness |
Ignition Positive Wire (+) | Black/Yellow |
Ignition Positive Wire Location | Ignition Switch Harness |
Accessory Positive Wire (+) | Yellow |
Accessory Positive Wire Location | Ignition Switch Harness |
Key Sense Positive Wire (+) | Blue/White |
Key Sense Positive Wire Location | Ignition Switch Harness |
Parking Light Positive Wire (+) | Red/Black |
Parking Light Positive Wire Location | At Security Module (Pin A11). The security module is located under the passenger side front seat. |
1999 Acura CL Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 1999 Acura CL alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Power Door Lock Wire (-) | Red/Yellow |
Power Door Lock Wire Location | At Security Module (Pin B17). The security module is located under the passenger side front seat. |
Power Door Unlock Wire (-) | Red/Blue |
Power Door Unlock Wire Location | At Security Module (Pin B6). The security module is located under the passenger side front seat. |
Power Door Trigger Negative Wire (-) | Black/White |
Power Door Trigger Negative Wire Location | At Security Module (Pin B12). The security module is located under the passenger side front seat. |
Dome Light Supervision Wire | Use Door Trigger |
Dome Light Supervision Wire Location | Use Door Trigger |
Trunk Pin Switch Negative Wire (-) | Blue/Red (5-Wire and Requires #R30-H Relay). The trunk/hatch release system, is a 5-wire system, and will require an extra relay. |
Trunk Pin Switch Negative Wire Location | At Security Module, Pin A4, The security module is located under the passenger side front seat. |
Horn Negative Wire (-) | Blue/Red or Light Green/Blue |
Horn Negative Wire Location | At Steering Column Harness |
Tachometer Wire Negative Wire (-) | Blue |
Tachometer Wire Negative Wire Location | At Tach Test Connector. The tachometer test connector is a 2-pin connector located on thepassenger side of the engine compartment by the firewall taped to a harness. |
Brake Light Wire (+) | Green/White |
Brake Light Wire Location | At Switch Above Brake Pedal |
Factory Alarm Disarm Wire (-) | Blue |
Factory Alarm Disarm Wire Location | At Security Module (Pin B8). The factory security module is located under the passenger front seat, this blue (-) wire will only test when turning the key in the drivers side door key cylinder. |
Feel free to use any 1999 Acura CL alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 1999 Acura CL car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 1999 Acura CL.