Whether your 1997 Honda Accord V6 is brand new or has 63k highway miles, car tune-ups and a routine servicing are important to keep your 1997 Honda Accord V6 in fabulous shape. A 1997 Honda Accord maintenance is also important for restoring engine performance, increasing the resale value of your 1997 Honda Accord V6, increasing vehicle reliability, obtaining higher gas mileage and more.
The staff at How to Honda Accord has taken all its 1997 Honda Accord troubleshooting articles, 1997 Honda Accord how to articles, 1997 Honda Accord how to guides, 1997 Honda Accord maintenance articles, 1997 Honda Accord service guides, 1997 Honda Accord DIY articles, 1997 Honda Accord do it yourself guides, 1997 Honda Accord maintenance guides and cataloged them online for use by our visitors for free. Our how to articles allow you to perform your own 1997 Honda Accord tune-up, 1997 Honda Accord troubleshooting, 1997 Honda Accord maintenance, 1997 Honda Accord servicing and 1997 Honda Accord repair rather than spending hundreds of dollars on an expensive auto mechanic bill just to keep your 1997 Honda Accord V6 alive.
Feel free to use any 1997 Honda Accord how to article or do it yourself guide that is listed on Modified Life but keep in mind that all information here is provided â€œas isâ€ without any warranty of any kind and most of the articles listed on our enthusiast website are submitted by the How to Honda Accord community. Use of the 1997 Honda Accord information is at your own risk. Always verify all how-to articles and DIY guides before applying any information found here to your 1997 Honda Accord V6.
Adding More Information or Posting a Comment
If you would like to help the How to Honda Accord community by adding any missing information or adding new information to this 1997 Honda Accord how to article, please feel free to post it at the bottom of this page. If you would like to let the How to Honda Accord community know that this 1997 Honda Accord DIY guide worked for you, please feel free to post it at the bottom of this page. We look forward to hearing from you.
How to Spark Plugs on 1997 Honda Accord V6
If you ever had a tough time starting your 1997 Honda Accord V6, you may have fouled or worn fouled spark plugs. Fouled spark plugs make it difficult to start an engine because the electrode at the end of the spark plug is worn. When the electrode is worn, a larger spark is necessary to jump the spark plug gap and ignite the fuel mixture thus making it hard to start the engine. Whether you’re using iridium spark plugs, ngk spark plugs, bosch spark plugs, e3 spark plugs, denso spark plugs or performance spark plugs, changing your spark plugs on your 1997 Honda Accord V6 will create better fuel mileage, increasing engine performance and make your 1997 Honda Accord engine run more efficiently.
3/8″ Torque Wrench
3/8″ Ratchet Extension
3/8″ Spark Plug Socket
Spark Plug Gap Tool
1997 Honda Accord Oil Filter
4 to 5 Quarts of 5W-30 Engine Oil
(Please refer to the 1997 Honda Accord oil capacity chart at the bottom of this page.)
Remove your new spark plugs from the packaging. Using your spark plug gap gauge, adjust each of your new spark plugs to the proper gap. The recommended gap for your new spark plugs is 0.039 to 0.043 inch.
Remove one spark plug wire and boot by grabbing the boot with two fingers and pulling straight up. If you have a tough time getting the spark plug boot loose, twist slightly while pulling straight up. Do not remove more than one spark plug wire/boot at a time to prevent them from being mixed up. Replace only one spark plug at a time.
Assemble your 3/8″ torque wrench, 3/8″ ratchet extension and spark plug socket. Slide the torque wrench, extension and spark plug socket combination into the spark plug shaft. Line up the socket with the spark plug and turn counter-clockwise to loosen. Remove the old spark plug from the spark plug shaft. Remove the old spark plug from the spark plug socket and discard it.
Remove the 3/8″ torque wrench from the extension and spark plug socket combination. Place a new spark plug that has been properly gapped into the extension and spark plug socket combination. Using your fingers, carefully slide the new spark plug into the spark plug shaft and thread the new spark plug clockwise into the engine.
While the extension and spark plug socket combination is still in the spark plug shaft, attach your 3/8″ torque wrench and torque the spark plug to specification. Refer to the spark plug torque specification chart at the bottom of this page.
Repeat step 2 to step 5 with each spark plug replacement. Do not over torque your 1997 Honda Accord V6 spark plugs or you will have a difficult time removing them in the future.
1997 Honda Accord V6 Spark Plug Torque Specification Chart
C27A VTEC 6-Cylinder Engine = 16 ft-lbs of torque