MODIFIEDLIFE

Chevrolet Car Alarm Wiring Diagrams

Modified Life is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn how it works.


Chevrolet alarm wiring diagrams containing Chevrolet wiring colors and wire locations to install a car alarm. Every Chevrolet alarm wiring chart contains information provided by other Chevrolet owners, so you can be sure that the alarm wire information is accurate and up-to-date.

Find Your Chevrolet

144 thoughts on “Chevrolet Car Alarm Wiring Diagrams”

  1. michelle singleton

    I need a diagram for stock alarm and aftermarket alarm for 1998 Chevy Blazer. I have a short somewhere and we are unable to locate. Please help asap.

  2. I’m looking for a wiring diagram for a 2012 Chevrolet spark, to install a car alarm. Thank you very much!

  3. I’m looking for a 1991 chevrolet s10 blazer wiring diagram. need the positive and negative door trigger input. What color are these wires and where are they located? Also I need the dome light output neg info too. Thanks!

  4. I am looking for a 2008 Chevy Silverado alarm wiring diagram. I am purchasing an alarm for a tool box in my truck that I want to bridge it to my factory installed alarm system. I was also hoping to be able to disable/alarm the tool box alarm at the same time I disable/alarm my factory alarm system using the chevy manufacturers key fob. Thanks

  5. Hi i have a 1999 chevy cavalier 2.2L coupe. I recently installed a keyless power door lock. The kit that i got doesn’t have wires to flash park lights once i lock/unlock the car. Is there anyway i can make my car park lights flash once i press a button on the remote? anyone? Thank you

  6. I have a 1998 Chevy blazer 4door LT. I can not find the stock alarm. I have an aftermarket alarm I wanna put in. can any one help me. I have removed almost everything under dash, the module I think it is makes me iffy I don’t wanna F stuff up. anything will help. anyone? thnx, Matt.

  7. I need the alarm wiring diagram for a 2006 Chevrolet 1500 Silverado Crew cab. The reason behind this is i need to find the wire on the switch that i can hook my air horns to and make them work from the steering wheel.

  8. I need instructions on how to install an alarm on my 92 chevy silverado, I need the color coding for the truck to know how to connect the alarm. as well as which wires to connect for the turning signals

  9. Laura, the placement of car alarm valet switches are dependent on the car alarm installer. Our advice is to take your car to a qualified alarm installer and ask them to find the car alarm valet switch. Any experienced car alarm installer should be able to locate it. Hope this helps. Good luck with finding your car alarm valet switch.

  10. I am trying to program a new keyless remote but don’t know where the valet/bypass switch is located? Anyone have a diagram or location of this switch? Thanks

  11. Hi Modifiedlife Team, you guys rock!! Thanks for assiting me in wiring my Mitsubishi Lancer. I have another installation today and its for the Chervrolet Spark, but I cant seem to find the alarm wiring diagram on here, can you help please?

  12. I am looking for a schematic for an alarm install on a 2004 Silverado 1500. I see one for 2005, if it is the same let me know. Also interested in how to disable the factory alarm if that is not in the wire guide. Thank You

  13. I am looking for the remote start wiring diagram for a 2002 chevy suburban. I see one for a 2003 if it is the same let me know thank you.

  14. Nolan Robertson

    I am looking for auto security wire schematic for 1996 Chevrolet C1500. If it is the same as an other model let me know which one. Thanks in advance.

  15. Hi, I’m trying to install a Clifford 590.2X alarm in a 1982 Malibu Classic, any help with the wiring? Thanks

  16. Enrique Sanchez

    I have a 2003 Chevy Trailblazer LT and I want to install a python 911 alarm system with remote start, also a tilt sensor, backup battery and audio sensor. Can I please get the wiring schematics. Thank You very much.

  17. I need an alarm wiring diagram for a 2010 HHR Chevy, if 2010 is not available then 2009 please. Thanks

  18. im currently purchasing a C3RS730 and was wondering if you could send me the wiring for a 2007 Chevorlet Monte Carlo Ls

  19. Eddie, as much as we would like to help you, not all car alarms are installed the same way. Different brands and different setups will call for different wiring. Our advice is to take your car to a qualified alarm installer and ask them to remove the alarm because it does take some wiring knowledge and experience to know what to remove. Hope this helps. Good luck.

  20. I want to disable the alarm on my 2006 Chevy HHR and there are no instructions in the owner’s manual or anywhere else that I can find. Does anyone know how to do this?

  21. Hi , you have information for the gmc savanna ( full size van ) 08 !????????
    for installing a k-9 alarm

  22. Hi, I’m looking for an alarm wiring diagram for my work truck, 2003 Chevrolet Astro…Thanks

  23. Can you please post a wiring diagram for installing an alarm for a 1996 Chevrolet Blazer S10? If you could post it, you would make my next couple of days easier. Thanks, Allan.

  24. Street lethal motorsports, almost all brake switches are located right above the brake pedal. Just make sure you tap the right switch cause there may more than one switch. Hope this helps. Good luck.

  25. street lethal motorsports

    hello-we are in desperate need of the brake switch location and color for a 2008 chevy colbalt (5-speed)
    thanks

  26. Mandy, an auxiliary channel output wire is not the same as the accessory wire. The auxiliary channel output wire is used to hook up an extra like a window roll down module or a trunk pop module. The accessory wire hooks up to a switched power source when you turn on your vehicle. Hope this helps. Good luck.

  27. i need to know if the accessory wire and an auxiliary channel output wire are the same thing in a 2003 chevy cavalier. my husband is hooking up a remote start and wants to make sure before he connects the wires. thanks

  28. I have a viper remote start keyless entry alarm and i want to install it on a 96 chevy tahoe 4×4 with 350 vortech. Can i get the wiring diagram for alarm?

  29. i am looking for a 1991 chevrolet caprice security diagram-if possible i would like to know how to install an astra4000 2w1 security alarm with it—–thanks in advance for your viewing my request

  30. I’m installing a alarm with remote start and disable, need to know wiring colours and how to disable factory theft system. Thanks.

  31. i need to disarm the factory alarm in 2001 chevy monte carlo . the remote is broken and the key doesn’t disarm it at the door lock

  32. im looking to put a sercurity system in my 2004 Chevrolet Impala. My impala is a base model it is not a LS or SS. It has a 3400 engine if that will help any. i would like to request a wiring diagram for a alarm system ok Thanks!

  33. Looking for wiring information for alarms, nav, etc for 2007 Silverado 1500. Including door switch wires, switched and constant 12 volt source, and parking/headlights, and horn wire information. Thanks!

Leave a Comment

Your email address will not be published. Required fields are marked *