1996 Jeep Grand Cherokee Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 1996 Jeep Grand Cherokee alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | Red/White |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Starter Positive Wire (+) | Yellow |
Starter Positive Wire Location | Ignition Switch Harness |
Ignition Positive Wire (+) | Dark Blue/Gray |
Ignition Positive Wire Location | Ignition Switch Harness |
Accessory Positive Wire (+) | Black/Orange (when installing a remote starter, both accessory #1 and #2 wires must be used.) |
Accessory Positive Wire Location | Ignition Switch Harness |
Secondary Accessory Positive Wire (+) | Red/Black (when installing a remote starter, both accessory #1 and #2 wires must be used.) |
Secondary Accessory Positive Wire Location | Ignition Switch Harness |
1996 Jeep Grand Cherokee Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 1996 Jeep Grand Cherokee alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Positive Wire (+) | Blue/Red |
Parking Light Positive Wire Location | At Head Light Switch |
Power Door Lock Negative Wire (-) | Orange/Violet And Pink/Black (5 Wire Reverse Polarity). Use orange/violet for lock and pink/black for unlock at the drivers door switch. Use black/white for lock and pink/black for unlock at the passenger front door switch. |
Power Door Lock Negative Wire Location | In Both Front Doors. |
Power Door Unlock Negative Wire (-) | Pink/Black (5 Wire Reverse Polarity). Use orange/violet for lock and pink/black for unlock at the drivers door switch. Use black/white for lock and pink/black for unlock at the passenger front door switch. |
Power Door Unlock Negative Wire Location | In Both Front Doors. |
Door Trigger Negative Wire (-) | Yellow |
Door Trigger Negative Wire Location | In Drivers Kick Panel |
Dome Light Supervision Wire | Turns On With Disarm |
Dome Light Supervision Wire Location | N/A |
Trunk Release Positive Wire (+) | Orange/Brown (Requires Relay) |
Trunk Release Positive Wire Location | At Hatch Release Switch |
Horn Negative Wire (-) | Gray/Orange |
Horn Negative Wire Location | At Steering Column Harness |
Tachometer Wire Negative Wire (-) | Gray/White |
Tachometer Wire Negative Wire Location | At PCM. The PCM (powertrain control module) is located high on the passenger side firewall. |
Brake Light Positive Wire (+) | White/Tan |
Brake Light Positive Wire Location | At Switch Above Brake Pedal |
Factory Alarm Disarm Wire (-) | Purple/Yellow |
Factory Alarm Disarm Wire Location | In Drivers Door Harness |
Factory Anti-Theft System | N/A |
Factory Anti-Theft System Location | N/A |
Feel free to use any 1996 Jeep Grand Cherokee alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 1996 Jeep Grand Cherokee car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 1996 Jeep Grand Cherokee.
2 thoughts on “1996 Jeep Grand Cherokee Alarm Wiring Chart”
Oca, as much as we would like to help you, not all car alarms are installed the same way. Different brands and different setups will call for different wiring. Our advice is to take your car to a qualified alarm installer and ask them how to disarm the alarm because it does take some wiring knowledge and experience to know what to do. Hope this helps. Good luck on your 1996 Jeep Grand Cherokee alarm troubleshooting.
i need a diagram of 1996 Jeep Grand Cherokee, how to disarm anti theft system where can i find it. the car wont start i check on the ignition and distributor assembly but still wont start the engine. i guess that the anti theft alarm is triggered . can someone help me on this. thank you, oca.