1997 Toyota Camry Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 1997 Toyota Camry alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant Power 12v+ Wire (+) | White/Red |
Battery Constant Power 12v+ Wire Location | At Ignition Switch Harness |
Ignition Wire (+) | Black/Yellow |
Ignition Wire Location | At Ignition Switch Harness |
Second Ignition Wire (+) | Black/Red |
Second Ignition Wire Location | At Ignition Switch Harness |
Accessory Wire (+) | Blue/Red |
Accessory Wire Location | At Ignition Switch Harness |
Second Accessory Wire (+) | N/A |
Second Accessory Wire Location | N/A |
Starter Wire (+) | Red |
Starter Wire Location | At Ignition Switch Harness |
Second Starter Wire (+) | N/A |
Second Starter Wire Location | At Ignition Switch Harness |
Ground Wire | Chassis |
1997 Toyota Camry Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 1997 Toyota Camry alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Brake Light Wire (+) | Green/White |
Brake Light Wire Location | At the bottom of the fuse box. |
Dome Light Supervision Wire | Use Door Trigger (Requires Relay) |
Dome Light Supervision Wire Location | N/A |
Door Trigger Wire (+) | Red/White |
Door Trigger Wire Location | At the top of the fuse box. |
Hood Pin Switch Wire (-) | N/A |
Hood Pin Switch Wire Location | N/A |
Horn Wire (-) | Green/Black |
Horn Wire Location | At the steering column wire harness. |
Key Sense Wire (+) | Blue/Black |
Key Sense Wire Location | At Ignition Switch Harness |
Parking Light Wire (-) | Green |
Parking Light Wire Location | At the steering column wire harness. |
Power Door Lock Wire (-) | Dark Blue/White |
Power Door Lock Wire Location | At the orange plug at the bottom of fuse box. The lock and unlock wires are 18-gauge wires and will only test while turning the key in the passenger door key cylinder. They will not test when using the power door lock switch. |
Power Door Unlock Wire (-) | Dark Blue |
Power Door Unlock Wire Location | At the orange plug at the bottom of fuse box. The lock and unlock wires are 18-gauge wires and will only test while turning the key in the passenger door key cylinder. They will not test when using the power door lock switch. |
Tachometer Wire (-) | Black or Gray |
Tachometer Wire Location | On the 4-cylinder engine, the black wire is in a gray connector located at the ignition coil on the drivers side of the engine. On the V6 engine, use the gray wire located at the ignitor located in front of the strut tower. |
Trunk Pin Switch Wire (-) | N/A |
Trunk Pin Switch Wire Location | N/A |
Trunk Release Wire (+) | N/A |
Trunk Release Wire Location | N/A |
Wait to Start Light Wire (-) | N/A |
Wait to Start Light Wire Location | N/A |
Factory Alarm Arm Wire (-) | N/A |
Factory Alarm Arm Wire Location | N/A |
Factory Alarm Disarm Wire (-) | Disarms with the key sense wire. |
Factory Alarm Disarm Wire Location | At Ignition Switch Harness |
Factory Anti-Theft System | N/A |
Factory Anti-Theft System Location | N/A |
Factory Immobilizer Bypass | N/A |
Feel free to use any 1997 Toyota Camry alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 1997 Toyota Camry car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 1997 Toyota Camry.