2008 Chevrolet Corvette Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2008 Chevrolet Corvette alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | Red/Black |
Battery Constant 12v+ Positive Wire Location | At Dash Fuse Box (Black 36-Pin Plug) |
Starter Positive Wire (+) | N/A |
Starter Positive Wire Location | N/A |
Second Starter Positive Wire (+) | Light Green/White (Use 1511-Ohm Resistor) |
Second Starter Positive Wire Location | At BCM Module attached to Dash Fuse Box in the Passenger Foot Well (Gray 72-Pin Plug) |
Ignition Positive Wire (+) | Pink |
Ignition Positive Wire Location | At BCM Module attached to Dash Fuse Box in the Passenger Foot Well (Red 41-Pin Plug) |
Second Ignition Positive Wire (+) | N/A |
Second Ignition Positive Wire Location | N/A |
Third Ignition Positive Wire (+) | N/A |
Third Ignition Positive Wire Location | N/A |
Accessory Positive Wire (+) | Yellow |
Accessory Positive Wire Location | At BCM Module attached to Dash Fuse Box in the Passenger Foot Well (Gray 72-Pin Plug) |
Second Accessory Positive Wire (+) | N/A |
Second Accessory Positive Wire Location | N/A |
Key Sense Wire | N/A |
Key Sense Wire Location | N/A |
2008 Chevrolet Corvette Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2008 Chevrolet Corvette alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Negative Wire (-) | Brown/White |
Parking Light Negative Wire Location | At BCM Module attached to Dash Fuse Box in the Passenger Foot Well (Gray 72-Pin Plug) |
Parking Light Positive Wire (+) | Brown |
Parking Light Positive Wire Location | In Passenger Kick Panel |
Power Door Lock Negative Wire (-) | Orange/Black |
Power Door Lock Negative Wire Location | At Driver Window Switch (Green 10-Pin Plug) |
Power Door Unlock Negative Wire (-) | Orange/Black |
Power Door Unlock Negative Wire Location | At Driver Window Switch (Green 10-Pin Plug) |
Door Trigger Negative Wire (-) | Tan |
Door Trigger Negative Wire Location | At BCM Module attached to Dash Fuse Box in the Passenger Foot Well (Gray 72-Pin Plug) |
Dome Light Supervision Wire (+) | White |
Dome Light Supervision Wire Location | At BCM Module attached to Dash Fuse Box in the Passenger Foot Well (Red 41-Pin Plug) |
Trunk Release Negative Wire (-) | Brown/White |
Trunk Release Negative Wire Location | At BCM Module attached to Dash Fuse Box in the Passenger Foot Well (Gray 72-Pin Plug) |
Sliding Power Door Wire | N/A |
Sliding Power Door Wire Location | N/A |
Horn Negative Wire (-) | Yellow to Tan |
Horn Negative Wire Location | At BCM Module attached to Dash Fuse Box in the Passenger Foot Well (Gray 72-Pin Plug) |
Tachometer Wire Negative Wire (-) | Any Wire Not Pink |
Tachometer Wire Negative Wire Location | At Any Fuel Injector |
Wait To Start Wire | N/A |
Wait To Start Location | N/A |
Brake Light Positive Wire (+) | Light Blue |
Brake Light Positive Wire Location | At BCM Module attached to Dash Fuse Box in the Passenger Foot Well (Gray 68-Pin Plug) |
Factory Alarm Disarm Wire (-) | Disarms from Factory Remote |
Factory Alarm Disarm Wire Location | N/A |
Factory Anti-Theft System | GM Proximity Anti-Theft System |
Factory Anti-Theft System Location | Requires Bypass Module |
Feel free to use any 2008 Chevrolet Corvette alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2008 Chevrolet Corvette car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2008 Chevrolet Corvette.