2008 Nissan Rogue Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2008 Nissan Rogue alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | Blue |
Battery Constant 12v+ Positive Wire Location | At Ignition Switch (White 6-Pin Plug) |
Starter Positive Wire (+) | Red |
Starter Positive Wire Location | At Ignition Switch (White 6-Pin Plug) |
Second Starter Positive Wire (+) | N/A |
Second Starter Positive Wire Location | N/A |
Ignition Positive Wire (+) | Pink |
Ignition Positive Wire Location | At Ignition Switch (White 6-Pin Plug) |
Second Ignition Positive Wire (+) | N/A |
Second Ignition Positive Wire Location | N/A |
Third Ignition Positive Wire (+) | N/A |
Third Ignition Positive Wire Location | N/A |
Accessory Positive Wire (+) | Pink |
Accessory Positive Wire Location | At Ignition Switch (White 6-Pin Plug) |
Second Accessory Positive Wire (+) | Brown |
Second Accessory Positive Wire Location | At Ignition Switch (White 6-Pin Plug) |
Key Sense Wire | N/A |
Key Sense Wire Location | N/A |
2008 Nissan Rogue Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2008 Nissan Rogue alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Negative Wire (-) | N/A |
Parking Light Negative Wire Location | N/A |
Parking Light Positive Wire (+) | Red |
Parking Light Positive Wire Location | In Driver Kick Panel (White 100-Pin Plug) |
Power Door Lock Negative Wire (-) | Pink (Type B) |
Power Door Lock Negative Wire Location | In Driver Kick Panel or BCM Module (White 15-Pin Plug) |
Power Door Unlock Negative Wire (-) | Brown (Type B) |
Power Door Unlock Negative Wire Location | In Driver Kick Panel or BCM Module (White 15-Pin Plug) |
Door Trigger Negative Wire (-) | Pink to White |
Door Trigger Negative Wire Location | At Door Lock Module |
Dome Light Supervision Wire (-) | Red |
Dome Light Supervision Wire Location | At Driver A-Pillar or BCM Module (Black 15-Pin Plug) |
Trunk Release Negative Wire (-) | Light Green to Green (Test wire while turning the key in the drivers door. This wire will also disarm the factory alarm.) |
Trunk Release Negative Wire Location | At Driver A-Pillar or BCM Module (Black 15-Pin Plug) |
Sliding Power Door Wire | N/A |
Sliding Power Door Wire Location | N/A |
Horn Negative Wire (-) | Gray |
Horn Negative Wire Location | At Horn Switch (Gray 8-Pin Plug) |
Tachometer Wire Negative Wire (-) | Gray |
Tachometer Wire Negative Wire Location | At Fuel Injector |
Wait To Start Wire | N/A |
Wait To Start Location | N/A |
Brake Light Positive Wire (+) | Yellow |
Brake Light Positive Wire Location | At Brake Pedal Switch |
Factory Alarm Disarm Wire (-) | Blue (Requires a Double Pulse) |
Factory Alarm Disarm Wire Location | In Driver Kick Panel or BCM Module (White 40-Pin Plug) |
Factory Anti-Theft System | Nissan Transponder Anti-Theft System |
Factory Anti-Theft System Location | At Ignition Switch (Requires Bypass Module for Remote Start) |
Feel free to use any 2008 Nissan Rogue alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2008 Nissan Rogue car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2008 Nissan Rogue.