1995 Chevrolet Impala Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 1995 Chevrolet Impala alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | Red |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Starter Positive Wire (+) | Yellow |
Starter Positive Wire Location | Ignition Switch Harness |
Second Starter Positive Wire (+) | N/A |
Second Starter Positive Wire Location | N/A |
Ignition Positive Wire (+) | Pink |
Ignition Positive Wire Location | Ignition Switch Harness |
Second Ignition Positive Wire (+) | Orange |
Second Ignition Positive Wire Location | Ignition Switch Harness |
Third Ignition Positive Wire (+) | N/A |
Third Ignition Positive Wire Location | N/A |
Accessory Positive Wire (+) | N/A |
Accessory Positive Wire Location | N/A |
Second Accessory Positive Wire (+) | N/A |
Second Accessory Positive Wire Location | N/A |
Key Sense Wire | Light Green |
Key Sense Wire Location | Ignition Switch Harness |
1995 Chevrolet Impala Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 1995 Chevrolet Impala alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Negative Wire (-) | N/A |
Parking Light Negative Wire Location | N/A |
Parking Light Positive Wire (+) | Brown |
Parking Light Positive Wire Location | At Light Switch |
Power Door Lock Negative Wire (-) | Black/Blue |
Power Door Lock Negative Wire Location | At Passenger Fuse Box |
Power Door Unlock Negative Wire (-) | Orange |
Power Door Unlock Negative Wire Location | At Passenger Fuse Box |
Door Trigger Negative Wire (-) | Black/White |
Door Trigger Negative Wire Location | At Passenger Side Fuse Box |
Dome Light Supervision Wire (-) | Black/White |
Dome Light Supervision Wire Location | At Passenger Side Fuse Box |
Trunk Trigger Negative Wire (-) | Blue/Green |
Trunk Trigger Negative Wire Location | At Driver Side Fuse Box |
Trunk Release Negative Wire (-) | N/A |
Trunk Release Negative Wire Location | N/A |
Sliding Power Door Wire | N/A |
Sliding Power Door Wire Location | N/A |
Horn Negative Wire (-) | Light Green/Blue |
Horn Negative Wire Location | At Passenger Fuse Box |
Tachometer Wire | Blue |
Tachometer Wire Location | At PCM Module Under the Right Center of the Dash |
Wait To Start Wire | N/A |
Wait To Start Location | N/A |
Brake Light Positive Wire (+) | White/Black |
Brake Light Positive Wire Location | At Switch Above the Brake Pedal |
Factory Alarm Arm Wire (-) | N/A |
Factory Alarm Arm Wire Location | N/A |
Factory Alarm Disarm Wire (-) | N/A |
Factory Alarm Disarm Wire Location | N/A |
Factory Anti-Theft System | Vehicle Key Immobilizer |
Factory Anti-Theft System Location | Key Sends a RF Signal to the BCM Module |
Feel free to use any 1995 Chevrolet Impala alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 1995 Chevrolet Impala car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 1995 Chevrolet Impala.