2006 Chevrolet Impala Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2006 Chevrolet Impala alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | Red/White |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Ignition Positive Wire (+) | Pink |
Ignition Positive Wire Location | Ignition Switch Harness |
Second Ignition Positive Wire (+) | N/A |
Second Ignition Positive Wire Location | N/A |
Third Ignition Positive Wire (+) | N/A |
Third Ignition Positive Wire Location | N/A |
Accessory Positive Wire (+) | Brown |
Accessory Positive Wire Location | Ignition Switch Harness |
Second Accessory Positive Wire (+) | N/A |
Second Accessory Positive Wire Location | N/A |
Starter Positive Wire (+) | Yellow |
Starter Positive Wire Location | At ECM Module Behind Left Headlight |
Second Starter Positive Wire (+) | N/A |
Second Starter Positive Wire Location | N/A |
Key Sense Wire | White |
Key Sense Wire Location | At BCM Module to Left Side of the Steering Column |
2006 Chevrolet Impala Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2006 Chevrolet Impala alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Negative Wire (-) | Brown/White |
Parking Light Negative Wire Location | At Vehicle Light Switch |
Parking Lights Positive Wire (+) | N/A |
Parking Lights Positive Wire Location | N/A |
Power Door Lock Negative Wire (-) | Orange/Black |
Power Door Lock Negative Wire Location | Pin #12 at BCM Module to the Left of the Steering Column |
Power Door Unlock Negative Wire (-) | Orange/Black |
Power Door Unlock Negative Wire Location | Pin #11 at BCM Module to the Left of the Steering Column |
Door Trigger Negative Wire (-) | You Must Diode Isolate Both Triggers To Monitor All Doors |
Door Trigger Negative Wire Location | N/A |
Dome Light Supervision Wire (-) | Gray/Black |
Dome Light Supervision Wire Location | In Harness in Driver Kick Panel |
Hood Trigger Negative Wire (-) | Pink/Black |
Hood Trigger Negative Wire Location | At Vehicle Hood Pin Switch |
Trunk Trigger Negative Wire (-) | Orange/Black |
Trunk Trigger Negative Wire Location | In Harness in Driver Kick Panel |
Sliding Power Door Wire | N/A |
Sliding Power Door Wire Location | N/A |
Horn Negative Wire (-) | Tan |
Horn Negative Wire Location | At BCM Module to Left of Steering Column |
Brake Light Positive Wire (+) | Light Blue |
Brake Light Positive Wire Location | At BCM Module to Left of Steering Column |
Factory Alarm Disarm Wire (-) | N/A |
Factory Alarm Disarm Wire Location | N/A |
Factory Anti-Theft System | GM Passkey III Key Vehicle Immobilizer |
Factory Anti-Theft System Type | Key Sends a RF Signal to the BCM Module |
Feel free to use any 2006 Chevrolet Impala alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2006 Chevrolet Impala car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2006 Chevrolet Impala.