2014 Kia Sorento Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2014 Kia Sorento alarm wiring diagram. This will help you install your car alarm wiring correctly.
| Application | Wire Color and Location |
|---|---|
| Battery Constant Power 12v+ Wire (+) | Red |
| Battery Constant Power 12v+ Wire Location | At Ignition Switch Harness (On vehicles with smart key, this wire is located in the drivers kick panel in the white 15-pin plug, pin 12.) |
| Ignition Wire (+) | Orange |
| Ignition Wire Location | At Ignition Switch Harness (On vehicles with smart key, this wire is a green and located at the dash fuse box in the white 8-pin plug, pin 3.) |
| Second Ignition Wire (+) | N/A |
| Second Ignition Wire Location | N/A |
| Accessory Wire (+) | Blue |
| Accessory Wire Location | At Ignition Switch Harness (On vehicles with smart key, this wire is located at the dash fuse box in the white 8-pin plug, pin 2.) |
| Second Accessory Wire (+) | Yellow |
| Second Accessory Wire Location | At Ignition Switch Harness (On vehicles with smart key, this wire is located at the dash fuse box in the white 8-pin plug, pin 1.) |
| Starter Wire (+) | Green |
| Starter Wire Location | At Ignition Switch Harness (On vehicles with smart key, this wire is a red and located at the dash fuse box in the white 8-pin plug, pin 4.) |
| Ground Wire | Chassis |
2014 Kia Sorento Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2014 Kia Sorento alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
| Application | Wire Color and Location |
|---|---|
| Brake Light Wire (+) | The brake wire is yellow (2.4L engine) and green/black (3.5L engine). |
| Brake Light Wire Location | At Switch Above the Brake Pedal |
| Dome Light Supervision Wire | Brown |
| Dome Light Supervision Wire Location | At Driver A-Pillar (White 22-Pin Plug, Pin 1) |
| Door Trigger Wire (-) | Green/Orange |
| Door Trigger Wire Location | At Dash Fuse Box (White 26-Pin Plug, Pin 1) |
| Hood Pin Switch Wire (-) | N/A |
| Hood Pin Switch Wire Location | N/A |
| Horn Wire (-) | Gray/Black to Gray |
| Horn Wire Location | In Driver Kick Panel (White 15-Pin Plug, Pin 6) |
| Key Sense Wire (+) | N/A |
| Key Sense Wire Location | N/A |
| Parking Light Wire (-) | Blue |
| Parking Light Wire Location | At Headlight Switch (White 13-Pin Plug, Pin 2) |
| Power Door Lock Wire (-) | Blue/Black |
| Power Door Lock Wire Location | At Dash Fuse Box (White 26-Pin Plug, Pin 4) |
| Power Door Unlock Wire (-) | Gray/Black |
| Power Door Unlock Wire Location | At Dash Fuse Box (White 26-Pin Plug, Pin 24) |
| Tachometer Wire (-) | Any Wire NOT Orange or Pink/Black |
| Tachometer Wire Location | Any Fuel Injector |
| Trunk Pin Switch Wire (-) | N/A |
| Trunk Pin Switch Wire Location | N/A |
| Trunk Release Wire (+) | Yellow/Black (Test this wire while opening the tailgate with the handle on the rear of the vehicle.) |
| Trunk Release Wire Location | At Dash Fuse Box (White 26-Pin Plug, Pin 11) |
| Factory Alarm Arm Wire (-) | N/A |
| Factory Alarm Arm Wire Location | N/A |
| Factory Alarm Disarm Wire (-) | Pink and Gray (Use Both, Requires Double Pulse) |
| Factory Alarm Disarm Wire Location | At Dash Fuse Box (White 26-Pin Plug, Pin 9 and 26) |
| Factory Anti-Theft System | Kia Transponder Anti-Theft System |
| Factory Anti-Theft System Location | At Ignition Switch Tumbler |
| Factory Immobilizer Bypass | Requires Immobilizer Bypass Module |
Feel free to use any 2014 Kia Sorento alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2014 Kia Sorento car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2014 Kia Sorento.