2014 Chevrolet Spark Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2014 Chevrolet Spark alarm wiring diagram. This will help you install your car alarm wiring correctly.
| Application | Wire Color and Location |
|---|---|
| Battery Constant 12v+ Positive Wire (+) | Red/Green |
| Battery Constant 12v+ Positive Wire Location | At BCM Module Above the Driver Side Kick Panel (Blue 27-Pin Plug) |
| Starter Positive Wire (+) | Connection Must Be Made with Interface Bypass Module |
| Starter Positive Wire Location | At Ignition Switch Harness |
| Second Starter Positive Wire (+) | N/A |
| Second Starter Positive Wire Location | N/A |
| Ignition Positive Wire (+) | Purple/Black |
| Ignition Positive Wire Location | At BCM Module Above the Driver Side Kick Panel (Green 25-Pin Plug) |
| Second Ignition Positive Wire (+) | N/A |
| Second Ignition Positive Wire Location | N/A |
| Third Ignition Positive Wire (+) | N/A |
| Third Ignition Positive Wire Location | N/A |
| Accessory Positive Wire (+) | Purple/Yellow |
| Accessory Positive Wire Location | At BCM Module Above the Driver Side Kick Panel (Green 25-Pin Plug) |
| Second Accessory Positive Wire (+) | N/A |
| Second Accessory Positive Wire Location | N/A |
| Key Sense Wire | N/A |
| Key Sense Wire Location | N/A |
2014 Chevrolet Spark Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2014 Chevrolet Spark alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
| Application | Wire Color and Location |
|---|---|
| Parking Light Negative Wire (-) | Green/Gray |
| Parking Light Negative Wire Location | At BCM Module Above the Driver Side Kick Panel (White 26-Pin Plug) |
| Parking Light Positive Wire (+) | N/A |
| Parking Light Positive Wire Location | N/A |
| Power Door Lock Negative Wire (-) | Brown/Yellow |
| Power Door Lock Negative Wire Location | At BCM Module Above the Driver Side Kick Panel (Pink 27-Pin Plug) |
| Power Door Unlock Negative Wire (-) | Brown/White |
| Power Door Unlock Location | At BCM Module Above the Driver Side Kick Panel (Gray 26-Pin Plug) |
| Door Trigger Negative Wire (-) | Gray |
| Door Trigger Negative Wire Location | At BCM Module Above the Driver Side Kick Panel (Gray 27-Pin Plug) |
| Dome Light Supervision Wire (+) | Gray |
| Dome Light Supervision Wire Location | At BCM Module Above the Driver Side Kick Panel (Gray 26-Pin Plug) |
| Trunk Release Negative Wire (-) | Green |
| Trunk Release Negative Wire Location | At BCM Module Above the Driver Side Kick Panel (Gray 26-Pin Plug) |
| Sliding Power Door Wire (-) | N/A |
| Sliding Power Door Wire Location | N/A |
| Horn Negative Wire (-) | Brown/White |
| Horn Negative Wire Location | At BCM Module Above the Driver Side Kick Panel (Brown 26-Pin Plug) |
| Tachometer Wire Negative Wire (-) | Connection Must Be Made with Interface Bypass Module |
| Tachometer Wire Negative Wire Location | N/A |
| Wait To Start Wire | N/A |
| Wait To Start Location | N/A |
| Brake Light Positive Wire (+) | Connection Must Be Made with Interface Bypass Module |
| Brake Light Positive Wire Location | N/A |
| Factory Alarm Disarm Wire (-) | Connection Must Be Made with Interface Bypass Module |
| Factory Alarm Disarm Wire Location | N/A |
| Factory Anti-Theft System | GM Multiplex Transponder Anti-Theft System |
| Factory Anti-Theft System Location | Requires Bypass Module |
Feel free to use any 2014 Chevrolet Spark alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2014 Chevrolet Spark car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2014 Chevrolet Spark.