2013 Chevrolet Spark Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2013 Chevrolet Spark alarm wiring diagram. This will help you install your car alarm wiring correctly.
| Application | Wire Color and Location |
|---|---|
| Battery Constant 12v+ Positive Wire (+) | Red/Violet or Red/Gray |
| Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
| Starter Positive Wire (+) | Yellow/Violet |
| Starter Positive Wire Location | Ignition Switch Harness |
| Second Starter Positive Wire (+) | N/A |
| Second Starter Positive Wire Location | N/A |
| Ignition Positive Wire (+) | Violet/Black |
| Ignition Positive Wire Location | Ignition Switch Harness |
| Second Ignition Positive Wire (+) | Violet/Brown |
| Second Ignition Positive Wire Location | Ignition Switch Harness |
| Third Ignition Positive Wire (+) | N/A |
| Third Ignition Positive Wire Location | N/A |
| Accessory Positive Wire (+) | Violet/Yellow |
| Accessory Positive Wire Location | Ignition Switch Harness |
| Second Accessory Positive Wire (+) | N/A |
| Second Accessory Positive Wire Location | N/A |
| Key Sense Wire | N/A |
| Key Sense Wire Location | N/A |
2013 Chevrolet Spark Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2013 Chevrolet Spark alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
| Application | Wire Color and Location |
|---|---|
| Parking Light Negative Wire (-) | Brown/Violet |
| Parking Light Negative Wire Location | In Harness at Driver Side Fuse Box Behind the Dashboard |
| Parking Light Positive Wire (+) | N/A |
| Parking Light Positive Wire Location | N/A |
| Power Door Lock Negative Wire (-) | Blue/White |
| Power Door Lock Negative Wire Location | In Harness in Driver Kick Panel |
| Power Door Unlock Negative Wire (-) | White |
| Power Door Unlock Negative Wire Location | In Harness in Driver Kick Panel |
| Door Trigger Negative Wire (-) | Yellow |
| Door Trigger Negative Wire Location | This Wire Covers all Three Passenger Doors and Will Not Individually Monitor Them. |
| Dome Light Supervision Wire (-) | Yellow |
| Dome Light Supervision Wire Location | In Harness at Driver Side Fuse Box Behind the Dashboard |
| Trunk Trigger Negative Wire (-) | Dark Blue/Yellow |
| Trunk Trigger Negative Wire Location | In Harness at Driver Side Fuse Box Behind the Dashboard |
| Trunk Release Negative Wire (-) | N/A |
| Trunk Release Negative Wire Location | N/A |
| Sliding Power Door Wire | N/A |
| Sliding Power Door Wire Location | N/A |
| Horn Negative Wire (-) | Brown/Gray |
| Horn Negative Wire Location | Ignition Switch Harness |
| Tachometer Wire Negative Wire (-) | White |
| Tachometer Wire Negative Wire Location | In Harness at the Rear of the Gauges |
| Wait To Start Wire | N/A |
| Wait To Start Location | N/A |
| Brake Light Positive Wire (+) | Brown/Yellow |
| Brake Light Positive Wire Location | At Switch Above the Brake Pedal |
| Factory Alarm Arm Wire (-) | N/A |
| Factory Alarm Arm Wire Location | N/A |
| Factory Alarm Disarm Wire (-) | N/A |
| Factory Alarm Disarm Wire Location | N/A |
| Factory Anti-Theft System | GM Passkey III Immobilizer |
| Factory Anti-Theft System Location | Key Sends RF Signal to the BCM Module |
Feel free to use any 2013 Chevrolet Spark alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2013 Chevrolet Spark car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2013 Chevrolet Spark.