2011 Toyota Avalon Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2011 Toyota Avalon alarm wiring diagram. This will help you install your car alarm wiring correctly.
| Application | Wire Color and Location |
|---|---|
| Battery Constant Power 12v+ Wire (+) | Black |
| Battery Constant Power 12v+ Wire Location | At the dash fuse box. |
| Ignition Wire (+) | Yellow |
| Ignition Wire Location | At the ignition switch harness. On vehicles with Smart Key (Push Button Start), the ignition wire is beige to yellow wire(+) located to the left of the steering column (White 18-Pin Plug, Pin 11). |
| Second Ignition Wire (+) | Green |
| Second Ignition Wire Location | At the ignition switch harness. On vehicles with smart key (push-button start), the ignition 2 wire is a light green (+) located at the dash fuse box (Rear White 10-Pin Plug, Pin 9). |
| Accessory Wire (+) | Gray |
| Accessory Wire Location | At the ignition switch harness. On vehicles with smart key (push-button start), the accessory wire is a red (+) located at the dash fuse box (Rear White 10-Pin Plug, Pin 3). |
| Second Accessory Wire (+) | N/A |
| Second Accessory Wire Location | N/A |
| Starter Wire (+) | Blue |
| Starter Wire Location | At the ignition switch harness. On vehicles with smart key (push-button start), the start switch 1 wire is blue (-) and the start switch 2 wire is purple (-) at the engine switch (Black 14-Pin Plug, Pins 7 and 2). |
| Second Starter Wire (+) | Red |
| Second Starter Wire Location | At Ignition Switch Harness |
| Ground Wire | Chassis |
2011 Toyota Avalon Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2011 Toyota Avalon alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
| Application | Wire Color and Location |
|---|---|
| Brake Light Wire (+) | White to Blue |
| Brake Light Wire Location | At Switch Above the Brake Pedal |
| Dome Light Supervision Wire | Brown |
| Dome Light Supervision Wire Location | At the dash fuse box. |
| Door Trigger Wire (+) | Blue to Pink |
| Door Trigger Wire Location | In Driver Kick Panel |
| Hood Pin Switch Wire (-) | N/A |
| Hood Pin Switch Wire Location | N/A |
| Horn Wire (-) | Gray |
| Horn Wire Location | At the horn switch. |
| Key Sense Wire (+) | N/A |
| Key Sense Wire Location | N/A |
| Parking Light Wire (-) | Blue |
| Parking Light Wire Location | At Headlight Switch |
| Power Door Lock Wire (-) | Green to Purple |
| Power Door Lock Wire Location | In the driver side kick panel. This wire is only needed if the door locks do not function with the aftermarket system while the vehicle is running. All other times just use the factory alarm arm wire. |
| Power Door Unlock Wire (-) | Blue to Brown |
| Power Door Unlock Wire Location | In the driver kick panel. This wire is only needed if the Door Locks do not function with the aftermarket system while the vehicle is running. All other times just use the factory alarm disarm wire. |
| Tachometer Wire (-) | Black to White |
| Tachometer Wire Location | Left of the steering column. |
| Trunk Pin Switch Wire (-) | N/A |
| Trunk Pin Switch Wire Location | N/A |
| Trunk Release Wire (+) | N/A |
| Trunk Release Wire Location | N/A |
| Wait to Start Light Wire (-) | N/A |
| Wait to Start Light Wire Location | N/A |
2011 Toyota Avalon Alarm Immobilizer Wiring and Location
Knowing your 2011 Toyota Avalon immobilizer wiring makes it simple to install new car alarm. Our 2011 Toyota Avalon car alarm guide shows you the exact wire color and where the alarm wires are located in your car. It also tells you where your 2011 Toyota Avalon immobilizer is located. Find your 2011 Toyota Avalon alarm and immobilizer location below!
| Application | Wire Color |
|---|---|
| Factory Alarm Arm Wire (-) | N/A |
| Factory Alarm Arm Wire Location | N/A |
| Factory Alarm Disarm Wire (-) | Gray to Purple |
| Factory Alarm Disarm Wire Location | In the driver kick panel. Test this wire while turning the key in the drivers door, this wire will also unlock the doors. |
| Factory Anti-Theft System | Toyota Transponder Anti-Theft System |
| Factory Anti-Theft System Location | Transponder at Ignition Switch Tumbler |
| Factory Immobilizer Bypass | Requires Immobilizer Bypass Module |
Feel free to use any 2011 Toyota Avalon alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2011 Toyota Avalon car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2011 Toyota Avalon.