2011 Nissan Rogue Auto Alarm Wiring Schematic

2011 Nissan Rogue Auto Alarm Wiring Schematic

Battery Constant 12v+ Positive Wire (+): Blue
Battery Constant 12v+ Positive Wire Location: At Ignition Switch (White 6-Pin Plug)

Starter Positive Wire (+): Red
Starter Positive Wire Location: At Ignition Switch (White 6-Pin Plug)

Second Starter Positive Wire (+): N/A
Second Starter Positive Wire Location: N/A

Ignition Positive Wire (+): Pink
Ignition Positive Wire Location: At Ignition Switch (White 6-Pin Plug)

Second Ignition Positive Wire (+): N/A
Second Ignition Positive Wire Location: N/A

Third Ignition Positive Wire (+): N/A
Third Ignition Positive Wire Location: N/A

Accessory Positive Wire (+): Pink
Accessory Positive Wire Location: At Ignition Switch (White 6-Pin Plug)

Second Accessory Positive Wire (+): Brown
Second Accessory Positive Wire Location: At Ignition Switch (White 6-Pin Plug)

Key Sense Wire: N/A
Key Sense Wire Location: N/A

Parking Light Negative Wire (-): N/A
Parking Light Negative Wire Location: N/A

Parking Light Positive Wire (+): Red
Parking Light Positive Wire Location: In Driver Kick Panel (White 100-Pin Plug)

Power Door Lock Negative Wire (-): Pink (Type B)
Power Door Lock Negative Wire Location: In Driver Kick Panel or BCM Module (White 15-Pin Plug)

Power Door Unlock Negative Wire (-): Brown (Type B)
Power Door Unlock Negative Wire Location: In Driver Kick Panel or BCM Module (White 15-Pin Plug)

Door Trigger Negative Wire (-): Pink to White
Door Trigger Negative Wire Location: At Door Lock Module

Dome Light Supervision Wire (-): Red
Dome Light Supervision Wire Location: At Driver A-Pillar or BCM Module (Black 15-Pin Plug)

Trunk Release Negative Wire (-): Light Green to Green (Test wire while turning the key in the drivers door. This wire will also disarm the factory alarm.)
Trunk Release Negative Wire Location: At Driver A-Pillar or BCM Module (Black 15-Pin Plug)

Sliding Power Door Wire: N/A
Sliding Power Door Wire Location: N/A

Horn Negative Wire (-): Gray
Horn Negative Wire Location: At Horn Switch (Gray 8-Pin Plug)

Tachometer Wire Negative Wire (-): Gray
Tachometer Wire Negative Wire Location: At Fuel Injector

Wait To Start Wire: N/A
Wait To Start Location: N/A

Brake Light Positive Wire (+): Yellow
Brake Light Positive Wire Location: At Brake Pedal Switch

Factory Alarm Disarm Wire (-): Blue (Requires Double Pulse)
Factory Alarm Disarm Wire Location: In Driver Kick Panel or BCM Module (White 40-Pin Plug)

Factory Anti-Theft System: Nissan Transponder Anti-Theft System
Factory Anti-Theft System Location: At Ignition Switch (Requires Bypass Module for Remote Start)

The 2011 Nissan Rogue alarm wire color and location information above is updated as it is submitted by the Modified Life community.

Leave a Comment

Your email address will not be published.

12 − two =