MODIFIEDLIFE

Modified Life is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more.

2010 Jeep Commander Car Alarm Wiring Diagram

2010 Jeep Commander Alarm Wires

Find the right alarm wire colors, locations, and polarity with this 2010 Jeep Commander alarm wiring diagram. This will help you install your car alarm wiring correctly.

Application Wire Color and Location
Battery Constant 12v+ Positive Wire (+) Red
Battery Constant 12v+ Positive Wire Location Ignition Switch Harness
Starter Positive Wire (+) Yellow/Gray
Starter Positive Wire Location Ignition Switch Harness
Second Starter Positive Wire (+) N/A
Second Starter Positive Wire Location N/A
Ignition Positive Wire (+) Pink/White
Ignition Positive Wire Location Ignition Switch Harness
Second Ignition Positive Wire (+) N/A
Second Ignition Positive Wire Location N/A
Third Ignition Positive Wire (+) N/A
Third Ignition Positive Wire Location N/A
Accessory Positive Wire (+) Pink/Gray
Accessory Positive Wire Location Ignition Switch Harness
Second Accessory Positive Wire (+) N/A
Second Accessory Positive Wire Location N/A
Key Sense Wire N/A
Key Sense Wire Location N/A

2010 Jeep Commander Alarm Sensor Wires

Find the right alarm sensor wire colors, locations, and polarity with this 2010 Jeep Commander alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.

Application Wire Color and Location
Parking Light Negative Wire (-) N/A
Parking Light Negative Wire Location N/A
Parking Light Positive Wire (+) N/A
Parking Light Positive Wire Location N/A
Power Door Lock Negative Wire (-) Violet/Light Green (Unlock is (-) through a 330 ohm resistor. Must use relay.)
Power Door Lock Negative Wire Location At Driver Door Module
Power Door Unlock Negative Wire (-) Violet/Light Green (Unlock is (-) through a 100 ohm resistor. Must use relay.)
Power Door Unlock Negative Wire Location At Driver Door Module
Door Trigger Negative Wire (-) Yellow/Orange
Door Trigger Negative Wire Location At Courtesy Light Under the Dash
Dome Light Supervision Wire (-) Yellow/Orange
Dome Light Supervision Wire Location At Courtesy Light Under the Dash
Trunk Trigger Negative Wire (-) Violet/Orange
Trunk Trigger Negative Wire Location Back of the Instrument Cluster
Trunk Release Negative Wire (-) N/A
Trunk Release Negative Wire Location N/A
Sliding Power Door Wire N/A
Sliding Power Door Wire Location N/A
Horn Negative Wire (-) Dark Green/Orange
Horn Negative Wire Location At Horn Switch
Tachometer Wire Negative Wire (-) Black/Gray
Tachometer Wire Negative Wire Location At Ignition Coil
Wait To Start Wire N/A
Wait To Start Location N/A
Brake Light Positive Wire (+) White/Tan
Brake Light Positive Wire Location At Switch Above the Brake Pedal
Factory Alarm Arm Wire (-) N/A
Factory Alarm Arm Wire Location N/A
Factory Alarm Disarm Wire (-) N/A
Factory Alarm Disarm Wire Location N/A
Factory Anti-Theft System Daimler Sentry Key Vehicle Immobilizer
Factory Anti-Theft System Location Key Sends RF Signal to the BCM Module

Feel free to use any 2010 Jeep Commander alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2010 Jeep Commander car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2010 Jeep Commander.

Leave a Comment

Your email address will not be published. Required fields are marked *