2009 Toyota Highlander Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2009 Toyota Highlander alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant Power 12v+ Wire (+) | White/Black |
Battery Constant Power 12v+ Wire Location | At Ignition Switch Harness |
Ignition Wire (+) | Black |
Ignition Wire Location | At Ignition Switch Harness |
Second Ignition Wire (+) | Black/Yellow |
Second Ignition Wire Location | At Ignition Switch Harness |
Accessory Wire (+) | Light Blue |
Accessory Wire Location | At Ignition Switch Harness |
Second Accessory Wire (+) | N/A |
Second Accessory Wire Location | N/A |
Starter Wire (+) | Yellow |
Starter Wire Location | At Ignition Switch Harness. On vehicles with smart key (push-button start), the start switch 1 wire is pink (-) and the start switch 2 wire is brown (-) at the engine switch (Black 14-Pin Plug, Pins 7 and 2). |
Second Starter Wire (+) | Red |
Second Starter Wire Location | At Ignition Switch Harness |
Ground Wire | Chassis |
2009 Toyota Highlander Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2009 Toyota Highlander alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Brake Light Wire (+) | Blue |
Brake Light Wire Location | At Switch Above the Brake Pedal |
Dome Light Supervision Wire | Light Blue |
Dome Light Supervision Wire Location | At the dash fuse box. |
Door Trigger Wire (+) | Blue |
Door Trigger Wire Location | In Driver Kick Panel |
Hood Pin Switch Wire (-) | N/A |
Hood Pin Switch Wire Location | N/A |
Horn Wire (-) | Yellow to Gray |
Horn Wire Location | At the horn switch. |
Key Sense Wire (+) | N/A |
Key Sense Wire Location | N/A |
Parking Light Wire (-) | Light Blue |
Parking Light Wire Location | At Headlight Switch |
Power Door Lock Wire (-) | Orange or Tan |
Power Door Lock Wire Location | At the driver side kick panel. |
Power Door Unlock Wire (-) | Green |
Power Door Unlock Wire Location | At the driver side kick panel. This wire is only needed if the door locks do not function with the aftermarket system while the vehicle is running. All other times just use the factory alarm disarm wire. |
Tachometer Wire (-) | Light Blue |
Tachometer Wire Location | At the data link connector. |
Trunk Pin Switch Wire (-) | N/A |
Trunk Pin Switch Wire Location | N/A |
Trunk Release Wire (+) | Yellow to Brown (Lift Gate), Orange (Glass) |
Trunk Release Wire Location | In Driver Kick Panel. Test this wire while opening the liftge or glass from the handle on the rear of the vehicle. On vehicles with power liftgate, the open/close wire is a red (-) at the switch on the dash (Blue 5-Pin Plug, Pin 4). |
Wait to Start Light Wire (-) | N/A |
Wait to Start Light Wire Location | N/A |
Factory Alarm Arm Wire (-) | N/A |
Factory Alarm Arm Wire Location | N/A |
Factory Alarm Disarm Wire (-) | Purple (Requires a Double Pulse) |
Factory Alarm Disarm Wire Location | In the driver side kick panel. Test this wire while turning the key in the drivers door, this wire will also unlock the doors. |
Factory Anti-Theft System | Toyota Transponder Anti-Theft System |
Factory Anti-Theft System Location | Transponder at Ignition Switch Tumbler |
Factory Immobilizer Bypass | Requires Immobilizer Bypass Module |
Feel free to use any 2009 Toyota Highlander alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2009 Toyota Highlander car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2009 Toyota Highlander.