MODIFIEDLIFE

2008 Toyota Camry Automotive Alarm Wiring Diagram

2008 Toyota Camry Alarm Wires

Find the right alarm wire colors, locations, and polarity with this 2008 Toyota Camry alarm wiring diagram. This will help you install your car alarm wiring correctly.

Application Wire Color and Location
Battery Constant Power 12v+ Wire (+) Black
Battery Constant Power 12v+ Wire Location At Ignition Switch Harness
Ignition Wire (+) Pink
Ignition Wire Location At Ignition Switch Harness
Second Ignition Wire (+) Yellow
Second Ignition Wire Location At Ignition Switch Harness
Accessory Wire (+) White
Accessory Wire Location At Ignition Switch Harness
Second Accessory Wire (+) N/A
Second Accessory Wire Location N/A
Starter Wire (+) Blue
Starter Wire Location At Ignition Switch Harness
Second Starter Wire (+) Gray
Second Starter Wire Location At Ignition Switch Harness
Ground Wire Chassis

2008 Toyota Camry Alarm Sensor Wires

Find the right alarm sensor wire colors, locations, and polarity with this 2008 Toyota Camry alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.

Application Wire Color and Location
Brake Light Wire (+) Blue or White
Brake Light Wire Location At Switch Above Brake Pedal
Dome Light Supervision Wire Use Door Trigger (Requires Relay)
Dome Light Supervision Wire Location N/A
Door Trigger Wire (+) The driver front door is the blue wire (-). The passenger front door is the yellow wire (-). The driver rear door is the light green wire (-). The passenger rear door is the gray wire (-). Use all 4 doors and diode isolate each wire.
Door Trigger Wire Location At Body ECU at the back of the fuse box.
Hood Pin Switch Wire (-) N/A
Hood Pin Switch Wire Location N/A
Horn Wire (-) Black or White
Horn Wire Location At the steering column wire harness.
Key Sense Wire (+) Blue
Key Sense Wire Location At Ignition Switch Harness
Parking Light Wire (-) Black
Parking Light Wire Location At the BECU Module in the vehicle fuse box.
Power Door Lock Wire (-) Brown
Power Door Lock Wire Location In Driver Kick Panel
Power Door Unlock Wire (-) Gray (Requires a Double Pulse)
Power Door Unlock Wire Location In Driver Kick Panel
Tachometer Wire (-) Black
Tachometer Wire Location At the Data Link Connector under the driver side of the dash.
Trunk Pin Switch Wire (-) N/A
Trunk Pin Switch Wire Location N/A
Trunk Release Wire (+) Black (5-Wire)
Trunk Release Wire Location At the BECU Module in the vehicle fuse box.
Wait to Start Light Wire (-) N/A
Wait to Start Light Wire Location N/A
Factory Alarm Arm Wire (-) N/A
Factory Alarm Arm Wire Location N/A
Factory Alarm Disarm Wire (-) Disarms with the key sense wire.
Factory Alarm Disarm Wire Location At Ignition Switch Harness
Factory Anti-Theft System Toyota Transponder Anti-Theft System
Factory Anti-Theft System Location Transponder at Ignition Switch Tumbler
Factory Immobilizer Bypass Requires Immobilizer Bypass Module

Feel free to use any 2008 Toyota Camry alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2008 Toyota Camry car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2008 Toyota Camry.

Leave a Comment

Your email address will not be published. Required fields are marked *