2008 Kia Rondo Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2008 Kia Rondo alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant Power 12v+ Wire (+) | Pink |
Battery Constant Power 12v+ Wire Location | At Ignition Switch Harness (6-Pin Plug, Pin 5). |
Ignition Wire (+) | Blue |
Ignition Wire Location | At Ignition Switch Harness (6-Pin Plug, Pin 6). |
Second Ignition Wire (+) | N/A |
Second Ignition Wire Location | N/A |
Accessory Wire (+) | Pink |
Accessory Wire Location | At Ignition Switch Harness (6-Pin Plug, Pin 3). |
Second Accessory Wire (+) | Blue |
Second Accessory Wire Location | At Ignition Switch Harness (6-Pin Plug, Pin 4). |
Starter Wire (+) | Black/White |
Starter Wire Location | At Ignition Switch Harness (6-Pin Plug, Pin 1). |
Ground Wire | Chassis |
2008 Kia Rondo Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2008 Kia Rondo alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Brake Light Wire (+) | Green |
Brake Light Wire Location | At Switch Above the Brake Pedal |
Dome Light Supervision Wire | Use Door Trigger |
Dome Light Supervision Wire Location | N/A |
Door Trigger Wire (-) | Red/Black |
Door Trigger Wire Location | At BCM Module located under the driver dash above the brake pedal (26-Pin Plug, Pin 18). |
Hood Pin Switch Wire (-) | N/A |
Hood Pin Switch Wire Location | N/A |
Horn Wire (-) | Yellow/Black |
Horn Wire Location | In Driver Kick Panel (Blue 42-Pin Plug, Pin 38). |
Key Sense Wire (+) | N/A |
Key Sense Wire Location | N/A |
Parking Light Wire (-) | Yellow |
Parking Light Wire Location | At Headlight Switch |
Power Door Lock Wire (-) | White |
Power Door Lock Wire Location | In Driver Kick Panel (Gray 39-Pin Plug, Pin 8). |
Power Door Unlock Wire (-) | White/Black |
Power Door Unlock Wire Location | In Driver Kick Panel (Gray 39-Pin Plug, Pin 9). |
Tachometer Wire (-) | White |
Tachometer Wire Location | In Driver Kick Panel (Blue 42-Pin Plug, Pin 38). |
Trunk Pin Switch Wire (-) | N/A |
Trunk Pin Switch Wire Location | N/A |
Trunk Release Wire (+) | Blue/Orange |
Trunk Release Wire Location | At BCM Module located under the driver dash above the brake pedal (22-Pin Plug, Pin 18). |
Factory Alarm Arm Wire (-) | N/A |
Factory Alarm Arm Wire Location | N/A |
Factory Alarm Disarm Wire (-) | To disarm, use the brown wire (this is the door key unlock wire) and the yellow (this is the unlock detection wire). Requires double pulse, use both and diode isolate. Test both of these wires while turning the key in the drivers door. |
Factory Alarm Disarm Wire Location | In Driver Kick Panel (Gray 39-Pin Plug, Pin 2 and 1). |
Factory Anti-Theft System | Kia Transponder Anti-Theft System |
Factory Anti-Theft System Location | Transponder at Ignition Switch Tumbler |
Factory Immobilizer Bypass | Requires Immobilizer Bypass Module |
Feel free to use any 2008 Kia Rondo alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2008 Kia Rondo car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2008 Kia Rondo.