2008 Chevrolet HHR Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2008 Chevrolet HHR alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | Red/Black |
Battery Constant 12v+ Positive Wire Location | At BCM module at front of center console on passenger side. |
Starter Positive Wire (+) | This vehicle starts when igntion power is applied and accessory power is lost. |
Starter Positive Wire Location | At BCM module at front of center console on passenger side. |
Second Starter Positive Wire (+) | N/A |
Second Starter Positive Wire Location | N/A |
Ignition Positive Wire (+) | Yellow |
Ignition Positive Wire Location | At BCM module at front of center console on passenger side. |
Second Ignition Positive Wire (+) | N/A |
Second Ignition Positive Wire Location | N/A |
Third Ignition Positive Wire (+) | N/A |
Third Ignition Positive Wire Location | N/A |
Accessory Positive Wire (+) | Brown |
Accessory Positive Wire Location | At BCM module at front of center console on passenger side. |
Second Accessory Positive Wire (+) | N/A |
Second Accessory Positive Wire Location | N/A |
Key Sense Wire | N/A |
Key Sense Wire Location | N/A |
2008 Chevrolet HHR Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2008 Chevrolet HHR alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Negative Wire (-) | N/A |
Parking Light Negative Wire Location | N/A |
Parking Light Positive Wire (+) | Brown |
Parking Light Positive Wire Location | At BCM module at front of center console on passenger side. |
Power Door Lock Negative Wire (-) | White (Use a 1.5k ohm resistor for unlock) |
Power Door Lock Negative Wire Location | At BCM module at front of center console on passenger side. |
Power Door Unlock Negative Wire (-) | White |
Power Door Unlock Negative Wire Location | At BCM module at front of center console on passenger side. |
Door Trigger Negative Wire (-) | Gray |
Door Trigger Negative Wire Location | At BCM module at front of center console on passenger side. |
Dome Light Supervision Wire (-) | N/A |
Dome Light Supervision Wire Location | N/A |
Trunk Release Negative Wire (-) | Pink/Black |
Trunk Release Negative Wire Location | At BCM module at front of center console on passenger side. |
Sliding Power Door Wire | N/A |
Sliding Power Door Wire Location | N/A |
Horn Negative Wire (-) | Tan |
Horn Negative Wire Location | At BCM module at front of center console on passenger side. |
Tachometer Wire Negative Wire (-) | Tan |
Tachometer Wire Negative Wire Location | At ECM Module Near the Driver Strut Tower |
Wait To Start Wire | N/A |
Wait To Start Location | N/A |
Brake Light Positive Wire (+) | White |
Brake Light Positive Wire Location | At BCM module at front of center console on passenger side. |
Factory Alarm Disarm Wire (-) | N/A |
Factory Alarm Disarm Wire Location | N/A |
Factory Anti-Theft System | GM Passlock II Anti-Theft System |
Factory Anti-Theft System Location | The BCM Module Must See a Specific Resistance value Before the Vehicle will Start Properly |
Feel free to use any 2008 Chevrolet HHR alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2008 Chevrolet HHR car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2008 Chevrolet HHR.