2007 Toyota 4Runner Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2007 Toyota 4Runner alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant Power 12v+ Wire (+) | Red |
Battery Constant Power 12v+ Wire Location | At Ignition Switch Harness |
Ignition Wire (+) | Black/Red |
Ignition Wire Location | At Ignition Switch Harness |
Second Ignition Wire (+) | Blue/Yellow |
Second Ignition Wire Location | At Ignition Switch Harness |
Accessory Wire (+) | White/Green |
Accessory Wire Location | At Ignition Switch Harness |
Second Accessory Wire (+) | N/A |
Second Accessory Wire Location | N/A |
Starter Wire (+) | Green/Black |
Starter Wire Location | At Ignition Switch Harness |
Second Starter Wire (+) | N/A |
Second Starter Wire Location | N/A |
Ground Wire | Chassis |
2007 Toyota 4Runner Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2007 Toyota 4Runner alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Brake Light Wire (+) | Green/Yellow |
Brake Light Wire Location | At Switch Above the Brake Pedal |
Dome Light Supervision Wire | White |
Dome Light Supervision Wire Location | At the dash fuse box. |
Door Trigger Wire (+) | Purple/Yellow |
Door Trigger Wire Location | At the Body ECU attached to the back of the dash fuse box. |
Hood Pin Switch Wire (-) | N/A |
Hood Pin Switch Wire Location | N/A |
Horn Wire (-) | Green/Red |
Horn Wire Location | At the dash fuse box (White 40-Pin Plug, Pin 29). |
Key Sense Wire (+) | N/A |
Key Sense Wire Location | N/A |
Parking Light Wire (+) | Green |
Parking Light Wire Location | At the dash fuse box. |
Power Door Lock Wire (-) | Red/White to Blue/White |
Power Door Lock Wire Location | In the driver side kick panel. This wire is only needed if the door locks do not function with the aftermarket system while the vehicle is running. All other times just use the factory alarm arm wire. |
Power Door Unlock Wire (-) | Green/White to Blue/Orange |
Power Door Unlock Wire Location | In the driver side kick panel. This wire is only needed if the door locks do not function with the aftermarket system while the vehicle is running. All other times just use the factory alarm disarm wire. |
Tachometer Wire (-) | Black/White |
Tachometer Wire Location | At the data link connector (White 16-Pin Plug, Pin 9). |
Trunk Pin Switch Wire (-) | N/A |
Trunk Pin Switch Wire Location | N/A |
Trunk Release Wire (+) | Locks and unlocks with the doors. |
Trunk Release Wire Location | In Driver Kick Panel |
Wait to Start Light Wire (-) | N/A |
Wait to Start Light Wire Location | N/A |
Factory Alarm Arm Wire (-) | N/A |
Factory Alarm Arm Wire Location | N/A |
Factory Alarm Disarm Wire (-) | Green (Requires a Double Pulse). Test this wire while turning the key in the driver door. This wire will also unlock the doors. |
Factory Alarm Disarm Wire Location | In Driver Kick Panel |
Factory Anti-Theft System | Toyota Transponder Anti-Theft System |
Factory Anti-Theft System Location | Transponder at Ignition Switch Tumbler |
Factory Immobilizer Bypass | Requires Immobilizer Bypass Module |
Feel free to use any 2007 Toyota 4Runner alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2007 Toyota 4Runner car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2007 Toyota 4Runner.