2007 Nissan Versa Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2007 Nissan Versa alarm wiring diagram. This will help you install your car alarm wiring correctly.
| Application | Wire Color and Location |
|---|---|
| Battery Constant 12v+ Positive Wire (+) | Blue |
| Battery Constant 12v+ Positive Wire Location | At Ignition Switch Harness |
| Starter Positive Wire (+) | White |
| Starter Positive Wire Location | At Ignition Switch Harness |
| Ignition Positive Wire (+) | Red |
| Ignition Positive Wire Location | At Ignition Switch Harness |
| Accessory Positive Wire (+) | Yellow |
| Accessory Positive Wire Location | At Ignition Switch Harness |
| Second Accessory Positive Wire (+) | Brown |
| Second Accessory Positive Wire Location | At Ignition Switch Harness |
| Key Sense Negative Wire (-) | Green Or Light Green |
| Key Sense Negative Wire Location | At Ignition Switch Harness |
2007 Nissan Versa Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2007 Nissan Versa alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
| Application | Wire Color and Location |
|---|---|
| Parking Light Positive Wire (+) | Gray |
| Parking Light Positive Wire Location | At Drivers Kick Panel, Harness To Rear Of Vehicle |
| Power Door Lock Negative Wire (-) | Gray |
| Power Door Lock Negative Wire Location | In drivers kick panel or BCM, pin 45, white 15-pin plug. The BCM (body control module) is located behind the glove box. |
| Power Door Unlock Negative Wire (-) | Purple Or Blue |
| Power Door Unlock Negative Wire Location | In Drivers Kick Panel Or BCM, Pin 46, White 15-Pin Plug. The BCM (Body Control Module) Is Located Behind The Glove Box. |
| Door Trigger Positive Wire (+) | The driver’s door is a light green that turn to brown (-) in pin 47, white 15-pin plug. The passenger door is a is light blue (-), pin 12, white 40-pin plug. The drivers rear door is a white that turns to a orange (-) at pin 48 white 15-pin plug. The passenger rear door is a yellow that turn to gray (-) pin 13, white 40-pin plug. Wire are located in each kick panel or at the BCM behind glove box. When connecting to an alarm system use all 4 wires and diode isolate. |
| Door Trigger Positive Wire Location | In Each Kick Panel Or BCM, Behind Glove Box |
| Dome Light Supervision Wire (-) | Brown |
| Dome Light Supervision Wire Location | At BCM, Black 15-Pin Plug, Pin 63. The BCM (body control module) is located behind the glove box. |
| Trunk Release Negative Wire (-) | Blue Changes To Purple (Test this wire while opening the hatch from the handle on the rear hatch.) |
| Trunk Release Negative Wire Location | At BCM, White 15-Pin Plug, Pin 53. The BCM (body control module) is located behind the glove box. |
| Horn Negative Wire (-) | Pink Changes To A Red |
| Horn Negative Wire Location | At Horn Switch In Column |
| Tachometer Wire Negative Wire (-) | Blue |
| Tachometer Wire Negative Wire Location | At ECM, Gray 32-Pin Plug, Pin 13. The ECM (engine control module) is located on the drivers side strut tower. |
| Brake Light Positive Wire (+) | Red |
| Brake Light Positive Wire Location | At Switch Above Brake Pedal |
| Factory Alarm Disarm Wire (-) | Brown (Test this disarm wire while turning the key in the driver’s door key cylinder. This wire also unlocks with a double pulse.) |
| Factory Alarm Disarm Wire Location | In Drivers Kick Panel Or BCM, White 40-Pin Plug, Pin 7. |
| Factory Anti-Theft System | Nissan’s Transponder Anti-Theft System |
| Factory Anti-Theft System Location | At Ignition Switch Tumbler |
Feel free to use any 2007 Nissan Versa alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2007 Nissan Versa car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2007 Nissan Versa.