2006 Kia Sedona Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2006 Kia Sedona alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant Power 12v+ Wire (+) | White |
Battery Constant Power 12v+ Wire Location | At Ignition Switch Harness |
Ignition Wire (+) | Green |
Ignition Wire Location | At Ignition Switch Harness |
Second Ignition Wire (+) | N/A |
Second Ignition Wire Location | N/A |
Accessory Wire (+) | Blue |
Accessory Wire Location | At Ignition Switch Harness |
Second Accessory Wire (+) | Pink |
Second Accessory Wire Location | At Ignition Switch Harness |
Starter Wire (+) | Orange |
Starter Wire Location | At Ignition Switch Harness |
Ground Wire | Chassis |
2006 Kia Sedona Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2006 Kia Sedona alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Brake Light Wire (+) | White |
Brake Light Wire Location | At Switch Above the Brake Pedal |
Dome Light Supervision Wire | Blue |
Dome Light Supervision Wire Location | At RAM (Rear Area Module) located in the left rear quarter panel and is part of the fuse box (16-Pin Plug, Pin 6). |
Door Trigger Wire (-) | N/A |
Door Trigger Wire Location | N/A |
Hood Pin Switch Wire (-) | N/A |
Hood Pin Switch Wire Location | N/A |
Horn Wire (-) | Yellow |
Horn Wire Location | At the horn switch. |
Key Sense Wire (+) | N/A |
Key Sense Wire Location | N/A |
Parking Light Wire (-) | Blue |
Parking Light Wire Location | At Headlight Switch |
Power Door Lock Wire (-) | To lock use the orange (-) factory alarm arm wire located at the power window switch in the drivers door. |
Power Door Lock Wire Location | At Driver Door |
Power Door Unlock Wire (-) | To unlock use the unlock motor wire pink (type c) wire located at the drivers power window switch connector 1 pin 4, this will unlock only the drivers door. To unlock the other doors, use a double pulse on the factory disarm wire a red (-) wire at the drivers power window switch (connector 2, pin 1). Test this wire, it will show ground when you unlock with the key in the drivers door. |
Power Door Unlock Wire Location | At Driver Door |
Tachometer Wire (-) | Pink |
Tachometer Wire Location | Any Fuel Injector |
Trunk Pin Switch Wire (-) | N/A |
Trunk Pin Switch Wire Location | N/A |
Trunk Release Wire (-) | N/A |
Trunk Release Wire Location | N/A |
Factory Alarm Arm Wire (-) | N/A |
Factory Alarm Arm Wire Location | N/A |
Factory Alarm Disarm Wire (-) | N/A |
Factory Alarm Disarm Wire Location | N/A |
Factory Anti-Theft System | Kia Transponder Anti-Theft System |
Factory Anti-Theft System Location | Transponder at Ignition Switch Tumbler |
Factory Immobilizer Bypass | Requires Immobilizer Bypass Module |
Feel free to use any 2006 Kia Sedona alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2006 Kia Sedona car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2006 Kia Sedona.