2006 Jeep Liberty Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2006 Jeep Liberty alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | Red |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Starter Positive Wire (+) | Light Blue/Red |
Starter Positive Wire Location | Ignition Switch Harness |
Second Starter Positive Wire (+) | N/A |
Second Starter Positive Wire Location | N/A |
Ignition Positive Wire (+) | Pink/Light Green |
Ignition Positive Wire Location | Ignition Switch Harness |
Second Ignition Positive Wire (+) | N/A |
Second Ignition Positive Wire Location | N/A |
Third Ignition Positive Wire (+) | N/A |
Third Ignition Positive Wire Location | N/A |
Accessory Positive Wire (+) | Pink/Yellow |
Accessory Positive Wire Location | Ignition Switch Harness |
Second Accessory Positive Wire (+) | N/A |
Second Accessory Positive Wire Location | N/A |
Key Sense Wire | Purple/Tan |
Key Sense Wire Location | Ignition Switch Harness |
2006 Jeep Liberty Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2006 Jeep Liberty alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Negative Wire (-) | Pink/Red |
Parking Light Negative Wire Location | Steering Column Harness |
Parking Light Positive Wire (+) | N/A |
Parking Light Positive Wire Location | N/A |
Power Door Lock Negative Wire (-) | Tan/Dark Blue |
Power Door Lock Negative Wire Location | Pin #14 in Top Left Plug at Back of the Fuse Box |
Power Door Unlock Negative Wire (-) | Tan/Dark Blue (Use 1.4k ohm resistor for lock.) |
Power Door Unlock Negative Wire Location | Pin #14 in Top Left Plug at Back of the Fuse Box |
Door Trigger Negative Wire (-) | Blue (Unlock is negative trigger thru a 426 ohm resistor.) |
Door Trigger Negative Wire Location | At BCM Module Behind the Driver Side of the Dash Near the Steering Column |
Dome Light Supervision Wire (-) | Black/White |
Dome Light Supervision Wire Location | At Vehicle Fuse Box |
Trunk Release Negative Wire (-) | N/A |
Trunk Release Negative Wire Location | N/A |
Sliding Power Door Wire | N/A |
Sliding Power Door Wire Location | N/A |
Horn Negative Wire (-) | Red/White |
Horn Negative Wire Location | In Harness at Steering Column |
Tachometer Wire Negative Wire (-) | Black |
Tachometer Wire Negative Wire Location | At Ignition Coil |
Wait To Start Wire | N/A |
Wait To Start Location | N/A |
Brake Light Positive Wire (+) | White/Tan |
Brake Light Positive Wire Location | At Switch Above the Brake Pedal |
Factory Alarm Arm Wire (-) | N/A |
Factory Alarm Arm Wire Location | N/A |
Factory Alarm Disarm Wire (-) | N/A |
Factory Alarm Disarm Wire Location | N/A |
Factory Anti-Theft System | Daimler Sentry Key Vehicle Immobilizer |
Factory Anti-Theft System Location | Key Sends RF Signal to the BCM Module |
Feel free to use any 2006 Jeep Liberty alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2006 Jeep Liberty car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2006 Jeep Liberty.