2006 Ford Escape Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2006 Ford Escape alarm wiring diagram. This will help you install your car alarm wiring correctly.
| Application | Wire Color and Location |
|---|---|
| Battery Constant Power 12v+ Wire (+) | Tan/Light Blue |
| Battery Constant Power 12v+ Wire Location | At Ignition Switch Harness |
| Ignition Wire (+) | Light Green/Purple |
| Ignition Wire Location | At Ignition Switch Harness |
| Second Ignition Wire (+) | N/A |
| Second Ignition Wire Location | N/A |
| Accessory Wire (+) | Black/Light Green |
| Accessory Wire Location | At Ignition Switch Harness |
| Second Accessory Wire (+) | N/A |
| Second Accessory Wire Location | N/A |
| Starter Wire (+) | Tan/Light Blue |
| Starter Wire Location | At Ignition Switch Harness |
| Ground Wire | Chassis |
2006 Ford Escape Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2006 Ford Escape alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
| Application | Wire Color and Location |
|---|---|
| Brake Light Wire (+) | Light Green |
| Brake Light Wire Location | At Switch Above the Brake Pedal |
| Dome Light Supervision Wire | Use Door Trigger |
| Dome Light Supervision Wire Location | N/A |
| Door Trigger Wire (-) | Pink |
| Door Trigger Wire Location | At SJB Module (Smart Junction Block) located at the fuse/relay box on the passenger side of the center console. |
| Hood Pin Switch Wire (-) | N/A |
| Hood Pin Switch Wire Location | N/A |
| Horn Wire (-) | Yellow/Light Green |
| Horn Wire Location | At SJB Module (Smart Junction Block) located at the fuse/relay box on the passenger side of the center console. |
| Key Sense Wire (+) | N/A |
| Key Sense Wire Location | N/A |
| Parking Light Wire (-) | White/Black |
| Parking Light Wire Location | At SJB Module (Smart Junction Block) located at the fuse/relay box on the passenger side of the center console. |
| Power Door Lock Wire (-) | Pink/White |
| Power Door Lock Wire Location | At SJB Module (Smart Junction Block) located at the fuse/relay box on the passenger side of the center console. |
| Power Door Unlock Wire (-) | Same Wire as Door Lock. This vehicle is a 1-wire door locking system. Lock requires a negative trigger through a 1000 ohm resistor and unlock requires a straight negative (-). Some units will also require 2 extra relays. |
| Power Door Unlock Wire Location | At SJB Module (Smart Junction Block) located at the fuse/relay box on the passenger side of the center console. |
| Tachometer Wire (-) | Not Red or White/Red |
| Tachometer Wire Location | At Any Fuel Injector |
| Trunk Pin Switch Wire (-) | N/A |
| Trunk Pin Switch Wire Location | N/A |
| Trunk Release Wire (-) | N/A |
| Trunk Release Wire Location | N/A |
| Factory Alarm Arm Wire (-) | N/A |
| Factory Alarm Arm Wire Location | N/A |
| Factory Alarm Disarm Wire (-) | Dark Blue/Light Green |
| Factory Alarm Disarm Wire Location | At SJB Module (Smart Junction Block) located at the fuse/relay box on the passenger side of the center console. |
| Factory Anti-Theft System | Ford Transponder Anti-Theft System |
| Factory Anti-Theft System Location | Requires Immobilizer Bypass Module |
| Factory Immobilizer Bypass | Requires Interface Bypass Module |
Feel free to use any 2006 Ford Escape alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2006 Ford Escape car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2006 Ford Escape.
6 thoughts on “2006 Ford Escape Car Alarm Wire Chart”
Clark, as much as we would like to help you, you will most likely have to consult your local Ford dealer or a certified Ford mechanic. Hope this helps. Good luck with your 2006 Ford Escape troubleshooting.
hi i just bought a 2006 Ford Escape and I noticed that the anti theft light is blinking every 2 or 3 sec when I park it, Is that normal or is there any way to stop the blinking? hope you can help me thanks!
Jim, it sounds like your 2006 Ford Escape alarm shock sensor is too sensitive. You need to lower the shocks sensor sensitivity to prevent you alarm from going off when cars drive by. Some alarm systems have external shock sensors which can be adjusted externally. Some alarm systems have built in shock sensors which can only be adjusted via alarm programming. If you have never adjusted or programmed your alarm system before, our advice is that you take your car to an experienced alarm installer. It should not take more than 30 minutes from start to finish to adjust it. Hope this helps. Good luck with your 2006 Ford Escape shock sensor adjustment.
my 2006 ford escape alarm goes off for no reason. Is there a recall on this car’s alarm?
Sam, as much as we would like to help you, not all car alarms are installed the same way. Different brands and different setups will call for different wiring. Our advice is to take your car to a qualified alarm installer or your local Ford dealer and ask them to reset your 2006 Ford Escape alarm because it does take some car alarm knowledge and experience to know what to do for your particular car alarm. Hope this helps. Good luck with resetting your alarm.
how do you reset the anti theft system on a 2006 ford escape?