Whether your an expert Chevrolet Malibu car alarm installer, Chevrolet Malibu performance fan or a novice Chevrolet Malibu enthusiast with a 2006 Chevrolet Malibu, a Chevrolet Malibu car alarm wiring diagram can save yourself a lot of time. One of the most time consuming tasks with installing an after market car alarm, car security, car remote start, automatic remote starter, shock sensor, tilt sensor, car alarm sensor or any auto alarm is identifying the correct color car security wires for a 2006 Chevrolet Malibu headlight bulb size you need for your low beam or high beam and save time. Also, find your other car light bulb sizes including your fog light, reverse light, turn signal, brake light and more. It’s that easy!
The Modified Life staff has taken all its Chevrolet Malibu car alarm wiring diagrams, Chevrolet Malibu car security wiring diagrams, Chevrolet Malibu car alarm wire diagrams, Chevrolet Malibu car security wiring schematics, Chevrolet Malibu car security diagrams, Chevrolet Malibu remote starter wiring diagrams and cataloged them online for our visitors to use for free. Our automotive wiring diagrams allow you to enjoy your new auto security electronics rather than spend countless hours trying to figure out which wires goes where.
Feel free to use any Chevrolet Malibu auto alarm wiring diagram that is listed on Modified Life but keep in mind that all information here is provided as-is without any warranty of any kind and most of the auto security wiring diagrams listed on our enthusiast website are submitted by the Modified Life community. Use of the wiring information is at your own risk. Always verify all wires, wire colors and diagrams before applying any information found here to your 2006 Chevrolet Malibu.
Questions
If you have any questions pertaining to the car wiring in a 2006 Chevrolet Malibu, please feel free to post it at the bottom of this page and either we will do our best to find you the information you need or hopefully someone in the Modified Life community will have the information you are looking for.
Request a Car Alarm Wiring Diagram
If you can not find your car alarm wiring, car security wire diagram or auto alarm wire diagram on Modified Life, please feel free to post a car alarm wiring diagram request on this page and we will do our best to find you the diagram, schematic or information you need for your mobile security installation.
Adding More Information
If you would like to help the Modified Life community by adding a car security wire schematic, car alarm wire diagram, car remote starter wire diagram, auto remote starter wire diagram or auto security wire diagram to our resource, please feel free to post any additional car wiring information about the 2006 Chevrolet Malibu on this page.
2006 Chevrolet Malibu Car Alarm Installation Guide
Battery Constant 12v+ Positive Wire (+): Red/White
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness
Starter Positive Wire (+): Violet
Starter Positive Wire Location: Ignition Switch Harness
Second Starter Positive Wire (+): White
Second Starter Positive Wire Location: Ignition Switch Harness
Ignition Positive Wire (+): Pink
Ignition Positive Wire Location: Ignition Switch Harness
Second Ignition Positive Wire (+): N/A
Second Ignition Positive Wire Location: N/A
Third Ignition Positive Wire (+): N/A
Third Ignition Positive Wire Location: N/A
Accessory Positive Wire (+): Brown
Accessory Positive Wire Location: Ignition Switch Harness
Second Accessory Positive Wire (+): White
Second Accessory Positive Wire Location: Ignition Switch Harness
Key Sense Wire: N/A
Key Sense Wire Location: N/A
Parking Light Negative Wire (-): N/A
Parking Light Negative Wire Location: N/A
Parking Light Positive Wire (+): Brown
Parking Light Positive Wire Location: At BCM Module Under the Right Side of the Center Console
Power Door Lock Negative Wire (-): White
Power Door Lock Negative Wire Location: At BCM Module Under the Right Side of the Center Console
Power Door Unlock Negative Wire (-): White (Use a 1.5K ohm resistor
)
Power Door Unlock Negative Wire Location: At 18-Pin Connector in Driver Kick Panel
Door Trigger Negative Wire (-): Gray (To avoid domelight delay use individual door triggers and diode isolate each wire.)
Door Trigger Negative Wire Location: At BCM Module Under the Right Side of the Center Console
Dome Light Supervision Wire (-): Gray
Dome Light Supervision Wire Location: At BCM Module Under the Right Side of the Center Console
Trunk Trigger Negative Wire (-): Orange/Black
Trunk Trigger Negative Wire Location: At BCM Module Under the Right Side of the Center Console
Trunk Release Negative Wire (-): N/A
Trunk Release Negative Wire Location: N/A
Sliding Power Door Wire: N/A
Sliding Power Door Wire Location: N/A
Horn Negative Wire (-): Tan
Horn Negative Wire Location: At BCM Module Under the Right Side of the Center Console
Tachometer Wire Negative Wire (-): N/A
Tachometer Wire Negative Wire Location: N/A
Wait To Start Wire: N/A
Wait To Start Location: N/A
Brake Light Positive Wire (+): White
Brake Light Positive Wire Location: At BCM Module Under the Right Side of the Center Console
Factory Alarm Arm Wire (-): N/A
Factory Alarm Arm Wire Location: N/A
Factory Alarm Disarm Wire (-): N/A
Factory Alarm Disarm Wire Location: N/A
Factory Anti-Theft System: GM Passkey III Vehicle Key Immobilizer
Factory Anti-Theft System Location: Key Sends RF Signal to the BCM Module
The 2006 Chevrolet Malibu alarm wire color and location information above is updated as it is submitted by the Modified Life community.