2005 Toyota Sienna Alarm Wires
Find the right alarm wire colors, locations, and polarity with this 2005 Toyota Sienna alarm wiring diagram. This will help you install your car alarm wiring correctly.
Application | Wire Color and Location |
---|---|
Battery Constant 12v+ Positive Wire (+) | White/Red |
Battery Constant 12v+ Positive Wire Location | Ignition Switch Harness |
Starter Positive Wire (+) | Black/Yellow |
Starter Positive Wire Location | Ignition Switch Harness |
Ignition Positive Wire (+) | Black |
Ignition Positive Wire Location | Ignition Switch Harness |
Second Ignition Positive Wire (+) | Black/Yellow |
Second Ignition Positive Wire Location | Ignition Switch Harness |
Accessory Positive Wire (+) | Pink |
Accessory Positive Wire Location | Ignition Switch Harness |
Key Sense Wire | Blue/Black (-) |
Key Sense Wire Location | Ignition Switch Harness |
2005 Toyota Sienna Alarm Sensor Wires
Find the right alarm sensor wire colors, locations, and polarity with this 2005 Toyota Sienna alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.
Application | Wire Color and Location |
---|---|
Parking Light Negative Wire (-) | Green/Black |
Parking Light Negative Wire Location | At Headlight Switch |
Parking Light Positive Wire (+) | Do Not Use. |
Parking Light Positive Wire Location | N/A |
Power Door Lock Negative Wire (-) | Light Green (You must test the lock and unlock wires while turning the key in the drivers side door key cylinder. They will not test when operating from the power door lock switch.) |
Power Door Lock Negative Wire Location | In Drivers Kick Panel, 18-Pin Plug |
Power Door Unlock Negative Wire (-) | Blue (Requires a Double Pulse). You must test the lock and unlock wires while turning the key in the drivers side door key cylinder. They will not test when operating from the power door lock switch. |
Power Door Unlock Negative Wire Location | In Drivers Kick Panel, 18-Pin Plug |
Door Trigger Negative Wire (-) | Blue |
Door Trigger Negative Wire Location | At Interior Light Switch On Dash |
Dome Light Supervision Wire (-) | Red/Green |
Dome Light Supervision Wire Location | At Interior Light Switch On Dash |
Trunk Release Negative Wire (-) | Yellow/Red (Requires Relay) |
Trunk Release Negative Wire Location | At Bottom Left Of Fuse Box, 22-Pin Plug |
Horn Negative Negative Wire (-) | Green/Black |
Horn Negative Negative Wire Location | At Steering Column Harness |
Tachometer Wire Negative Wire (-) | Black/Orange |
Tachometer Wire Negative Wire Location | At Ecm, Connector E4, Pin 5. The ECM (engine control module) is located behind the glovebox. Connector E4 is the top plug. |
Brake Light Positive Wire (+) | Green/White |
Brake Light Positive Wire Location | At Switch Above Brake Pedal |
Factory Alarm Disarm Wire (-) | Disarms With Key Sense Wire. The key sense wire will disarm the vehicle without unlocking the doors by applying a (-) negative to this wire during remote starting. |
Factory Alarm Disarm Wire Location | At Ignition Switch Harness |
Factory Anti-Theft Wire (-) | Transponder Anti-Theft System. Requires Bypass Module And Extra Ignition Key. |
Factory Anti-Theft Wire Location | Transponder At Ignition Switch Tumbler. |
Feel free to use any 2005 Toyota Sienna alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2005 Toyota Sienna car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2005 Toyota Sienna.