MODIFIEDLIFE

2005 Toyota Sequoia Car Alarm Wire Chart

2005 Toyota Sequoia Alarm Wires

Find the right alarm wire colors, locations, and polarity with this 2005 Toyota Sequoia alarm wiring diagram. This will help you install your car alarm wiring correctly.

Application Wire Color and Location
Battery Constant 12v+ Positive Wire (+) White/Blue
Battery Constant 12v+ Positive Wire Location Ignition Switch Harness
Starter Positive Wire (+) Black/White
Starter Positive Wire Location Ignition Switch Harness
Second Starter Positive Wire (+) N/A
Second Starter Positive Wire Location N/A
Ignition Positive Wire (+) Black/Red
Ignition Positive Wire Location Ignition Switch Harness
Second Ignition Positive Wire (+) Black/Yellow
Second Ignition Positive Wire Location Ignition Switch Harness
Third Ignition Positive Wire (+) N/A
Third Ignition Positive Wire Location N/A
Accessory Positive Wire (+) Pink
Accessory Positive Wire Location Ignition Switch Harness
Second Accessory Positive Wire (+) N/A
Second Accessory Positive Wire Location N/A
Key Sense Wire (-) Yellow/Green
Key Sense Wire Location At BECU, White Plug, Pin 13. The BECU (body electronic control unit) is located above the drivers kick panel.

2005 Toyota Sequoia Alarm Sensor Wires

Find the right alarm sensor wire colors, locations, and polarity with this 2005 Toyota Sequoia alarm sensor wire chart. This will help you connect all your car alarm sensors correctly.

Application Wire Color and Location
Parking Light Negative Wire (-) Green
Parking Light Negative Wire Location At BECU, Gray Plug, Pin 7. The BECU (body electronic control unit) is located above the drivers kick panel.
Parking Light Positive Wire (+) Green
Parking Light Positive Wire Location In Drivers Kick Panel, Harness To Rear Of Vehicle
Power Door Lock Negative Wire (-) This vehicle will require an extra relay and diodes to do the keyless entry function.
Power Door Lock Negative Wire Location N/A
Power Door Unlock Negative Wire (-) This vehicle will require an extra relay and diodes to do the keyless entry function.
Power Door Unlock Negative Wire Location N/A
Door Trigger Negative Wire (-) The driver door is a gray/red (-) in the black plug, pin 12. The passenger door is a light green/black (-) in the white plug, pin 22. The drivers rear door is a red/white (-) in the black plug, pin 7. The passenger rear door is a red/white (-) in the white plug, pin 8. When connecting to an alarm system, use all (4) door trigger wires and diode isolate.
Door Trigger Negative Wire Location At BECU. The BECU (body electronic control unit) is located above the drivers kick panel.
Dome Light Supervision Wire (-) White
Dome Light Supervision Wire Location At BECU, Black Plug, Pin 3. The BECU (body electronic control unit) is located above the drivers kick panel.
Trunk Release Negative Wire (-) N/A
Trunk Release Negative Wire Location N/A
Sliding Power Door Wire N/A
Sliding Power Door Wire Location N/A
Horn Negative Wire (-) Brown/Yellow
Horn Negative Wire Location At BECU, White Plug, Pin 26. The BECU (body electronic control unit) is located above the drivers kick panel.
Tachometer Wire Negative Wire (-) Yellow/Green
Tachometer Wire Negative Wire Location At ECM, 2nd Plug From Right, Pin 1. The ECM (engine control module) is located behind the glove box.
Wait To Start Wire N/A
Wait To Start Location N/A
Brake Light Positive Wire (+) Green/Yellow
Brake Light Positive Wire Location At Switch Above Brake Pedal
Factory Alarm Disarm Wire (-) Disarms With Keysense Wire. The key sense wire will disarm the vehicle without unlocking the doors by applying a (-) negative to this wire during remote starting.
Factory Alarm Disarm Wire Location At Ignition Switch Harness
Factory Anti-Theft System Transponder Anti-Theft System, Requires Bypass Module And Extra Ignition Key
Factory Anti-Theft System Location Transponder At Ignition Switch Tumbler

Feel free to use any 2005 Toyota Sequoia alarm wiring diagram that is listed here but keep in mind that all information here is provided as is without any warranty of any kind. Use of this 2005 Toyota Sequoia car alarm wire chart is at your own risk. Always verify all wires, wire colors and connection points before applying any information found here to your 2005 Toyota Sequoia.

4 thoughts on “2005 Toyota Sequoia Car Alarm Wire Chart”

  1. Luis, it sounds like either the alarm is malfunctioning, the remote has not been programmed correctly or there is a problem with the antenna communicating with the remote. Try checking the alarm module itself. Make sure there is power going to it and the antenna wire is plugged into the alarm module snugly. If this does not solve the problem, we suggest you take your car to an experienced audio installer and have them troubleshoot your problem. Hope this helps. Good luck with your 2005 Toyota Sequoia alarm troubleshooting.

  2. My 2004 toyota sequoia alarm is not working…. I pressed the lock/unlock buttons and the green light comes on but it will not chirp or lock or unlock doors. I replaced batteries on both alarm remotes, i tried reprogramming twice and no go…. Please help as I have to insert the key every time i have to open and lock doors. :)

  3. Kristin, as much as we would like to help you, not all car alarms are installed the same way. Different brands and different setups will call for different wiring. Our advice is to take your car to a qualified alarm installer and ask them how to disarm the alarm because it does take some wiring knowledge and experience to know what to do. Hope this helps. Good luck on your 2005 Toyota Sequoia alarm troubleshooting.

Leave a Comment

Your email address will not be published. Required fields are marked *